FP163F (11/99) Series 2000 Fiberglass Pipe and Fittings for general industrial service, maintenance and repair 2” - 6” installs with no shaving required Uses and applications Chemical process piping Cooling water piping Deionized water systems Drainage systems Food processing plant piping Jet engine air start systems Jet fuel and liquid petroleum piping Piping systems for alkalis and nonoxidizing chemicals Potable water lines Waste water and sewage systems General industrial service for moderately corrosive liquids Listings Mil-P-29206A for jet fuel and petroleum liquids U.S. Federal Regulations 21CFR175.105 and 21CFR177.2280 for conveying foodstuffs when joined with Bondstrand RP6B epoxy adhesive. Performance Pipe designs to 450 psi (3.1 MPa) using an 8000 psi (41.2 MPa) hydrostatic design stress in accordance with ASTM D2992 (B). Continuous operating temperatures to 250°F (121°C). Excellent corrosion resistance over a wide temperature range. See most recent release of Bondstrand Corrosion Guide (FP132) for specific applications. Weighs 1⁄6 th as much as Sch. 40 steel. Does not require thrust blocks at ambient temperatures when properly installed in most soils. Smooth inner liner (Hazen-Williams C = 150) produces extremely low frictional loss for greater discharge and reduced pumping costs. Low thermal conductivity (1⁄100 th of steel) minimizes heat losses. Individual system components may not have the same ratings as the pipe. Refer to the detailed product information for the specific components to determine the pressure rating for the system as a whole. Bondstrand® Product Data FIBERGLASSPIPEGROUP with guide specification
RkJQdWJsaXNoZXIy NDE1MjE4