2 Composition Pipe Filament-wound fiberglass-reinforced vinyl ester pipe with integral 0.050-inch (1.3 mm) resin-rich reinforced liner. Nominal Pipe Size ASTM Designation ( in) ( mm) ( D2996) 2-6 50-150 RTRP 12ED-1012 8-16 200-400 RTRP 12ED-1013 Filament-wound fittings Tees 90 ° and 45° elbows Crosses Nipples and couplings 45 ° laterals Tapered body reducers Molded fittings Tees (2 to 6 inch only) 90 ° and 45° elbows (2 to 6 inch only) Reducing flanges Plugs and end-caps Flanges Filament-wound or molded flanges with ANSI B16.1 and ANSI B16.5 drilling Molded reducing and blind flanges Thermosetting adhesives RP105B two-part vinyl ester RP34C two-part epoxy adhesive. Elbows Tees Flanges, blind flanges and reducing flanges Plugs and end-caps Crosses Nipples and couplings 45 ° laterals Tapered body reducers Tapered body reducers, tees and 90° and 45° elbows are available with any combination of Quick-Lock female and filament-wound or molded flange ends. Laying lengths of filament-wound fittings with Quick-Lock ends match those of ANSI B16.9 steel buttwelding fittings. Flanged ends match ANSI B16.1 and B16.5 center-to-face and face-to-face dimensions. Nominal Random Pipe Size Lengths ( in) ( mm) ( ft) ( m) 2-8 50-200 30 9 10-16 250-400 20 6 Pipe lengths Joining systems Quick-Lock® straight/taper adhesive-bonded joint featuring integral pipe stop in bell for predictable, precise laying lengths. Flanges and flanged fittings.
RkJQdWJsaXNoZXIy NDE1MjE4