NATIONAL TOLL FREE DIRECTORY1-866-574-5100 | ON THE WEBwww.nee.ca PLANT, TRUCK & TANK EQUIPMENT MULTI-PURPOSE FILLER/WITHDRAWAL VALVES Multi-Purpose Withdrawal Valves Application: Intended for use as a high capacity liquid withdrawal valve with a manual shut off device in LPG or NH3 containers. These valves are equipped with an integrated excess flow feature that is internal to the container. The ME671IBC is equipped with an integrated back check (IBC) feature built into the lower portion of the seat disc assembly. This feature allows liquid pressure built upstream of the shut-off disc assembly to automatically be relieved back to the container when line pressures exceed 10-25 PSI over container pressure. The (IBC) feature eliminates the need for hydrostatic relief valves to protect upstream piping or lines as well as greatly reducing product emissions and overall system safety. Features: • Plated ductile iron body with 1/4” NPT plugged auxiliary port • All stainless steel internal construction for maximum corrosion resistance • V-cup Teflon® packing stem seals • Rated 400 PSI/WOG • Removable data plate Note : For proper operation and performance of the excess flow feature the manual shutoff must be completely open and back seated. NEE # Inlet (MNPT) Withdrawal (FNPT) Approximate Excess Flow Closing Flow* (GPM/LPG) Hydrostatic Relief Vent Valve ME671DIBC-6** 1-1/4” 3/4” 50 N/A MEJ400** / MEJ402S ME671DIBC-8 1” 58 ME671D-6** 3/4” 50 MEH225** / MEH225SS ME671D-8 1” 58 ME672D 78 * For NH3 Flow Rates Multiply by .90 (Determined at 15 PSIG) ** Brass accessories cannot be used for NH3 Multi-Purpose Filler & Withdrawal Valves Application: Intended for use as a high capacity combination filler and liquid withdrawal valve with a manual shut off device in LPG or NH3 containers. These valves can be equipped with either a soft seat back check or excess flow feature that is internal to the container. Ideally suited for use in dispensing applications as a dual purpose high capacity tank filler valve as well as a liquid return line from the pump bypass valve. Featu s: • Plated ductile iron body with 1/4” NPT auxiliary plugged port • All stainless steel internal construction for maximum corrosion resistance • Supplied with ACME cap & chain assembly • V-cup Teflon® packing stem seals • Rated 400 PSI / WOG • Removable data plate Note : For proper operation and performance of the excess flow feature the manual shutoff must be completely open and back seated. Approximate Excess Flow Closing Flow Accessories NEE # Inlet (MNPT) Fill Connection (M.ACME) Withdrawal (FNPT) * Fill Capacity (GPM/LPG) * Liquid (GPM/LPG) ** Vapour (SCFH/LPG) Back Check Hydrostatic Relief Vent Valve ME673DEX-6 1-1/4” 1-3/4” 3/4” 100 58 27,000 No MEH225*** / MEH225SS MEJ400*** / MEJ402S ME673DEX-8 1” ME673DBC-6 3/4” N/A N/A Yes ME673DBC-8 1” * For NH3 Flow Rates Multiply by .90 ** For NH3 @ 100 PSI, Multiply by 1.6 *** Brass accessories cannot be used for NH3 ME672D ME671D-8 ME673DEX-8 ME673DBC-8
RkJQdWJsaXNoZXIy NDE1MjE4