CANADA’S LEADER IN ENERGY PRODUCTS EQUIPMENT PLANT, TRUCK & TANK EQUIPMENT BREAK-AWAY & SAFETY COUPLINGS Squibb-Taylor Flo-Max Break-Away Couplings Flo-Max Couplers are designed to safely disconnect the nurse tank hose from any tool bar in the event of a pull-away, a nurse tank roll-over, or any occurrence that would cause the nurse tank hose to become taut. When the Flo-Max Coupler disconnects, two swing checks close immediately. The inlet swing check, located on the male half of the coupler, remains with the nurse tank hose and prevents the nurse tank from releasing NH3. The outlet swing check remains with the tool bar preventing a release of NH3 from all piping or vessels located on the tool bar. To ensure long term operation, the manufacturer recommends that under normal service conditions this product should be inspected at least once a year and be repaired or replaced as required. NEE # Description Style FM126-1000 1 1/4” FNPT Break-away Coupling No Bracket NEE # Description Style FM126-1004 1 1/4” FNPT Break-away Coupling Bracket Repair Parts NEE # Description FM125-0022 O-ring and Tool kit NEE # Description FM125-0023 Plunger kit NEE # Description FM125-0024 O-ring kit Marshall Excelsior Break-Away Couplings FloKill Break-Away Couplings are designed for use with vapour or liquid lines to protect against separation and product spill during filling operations if a hose is pulled without being disconnected. Suitable for LP and NH3, Buna soft seat provides positive shut-off upstream and downstream, 100 to 300 lb of force required for pull-away. Approximately 100 lbs of force is required to reconnect. Available with bracket or lanyard style cable. Large internal bore is included for increased flow. Manufactured with steel construction for strength and durability. Note: Not U.L. approved. The MEP128-6 tool is made from a solid 3/4” diameter steel rod, formed into the shape of a large set of pliers. With the custom forks, simply slide them over the end of the bracket & the inlet side of the valve. Then compress the two handles together. This action can be done with one hand, leaving the other free to insert the mating nipple back into the valve side of the coupling without strain. Once the nipple has been securely snapped back into place, release pressure on the handles of the tool, allowing the retaining sleeve to slide back into a secured position. The valve is now whole again. NEE # Description OAL Style ME860S-8 1” F NPT Break-away 8” Bracket ME860S-6 3/4” F NPT Break-away 6” ME861S-6 Lanyard cable ME861S-8 1” F NPT Break-away 8” NEE # Description OAL Style ME860S-10 1-1/4” F NPT Break-away 9” Bracket ME861S-10 Lanyard cable MEP128-6 Reassembly tool N/A N/A Squibb Taylor TriPod Safety Break-Away Coupler Designed to prevent LPG escape at filling riser areas in the event of an accidental pull-away of a container being filled. Double backcheck allows closure in both coupler sections, minimizing LPG release at the riser & filling tank hose. Ideal for loading arm applications. Features: Release mechanism unaffected by pull-away. Easily reconnected for years of continued service. Stainless steel construction, teflon back check seats for long dependable operation. Adapts to most existing risers without the need for piping changes. Independent protection of each hose; not sensitive to the direction of the pull-away, with 5 year limited warranty. NEE # Inlet / Outlet Flow Capacity TP-0-1000 3/4” M NPT 25 GPM TP-5-1001 1” M NPT 55 GPM NEE # Inlet / Outlet Flow Capacity TP-6-1001 1” M NPT 77 GPM TP-7-1001 1-1/4” M NPT 126 GPM NEE # Inlet / Outlet Flow Capacity TP-4-1000 3” M NPT / 2” F NPT 350 GPM O-Ring Kits NEE # Description TP3-1304 For TP-3 Models NEE # Description TP4-P5-099 For TP-4 Ball Socket (Small) NEE # Description TP4-P5-100 For TP-4 Ball Socket (Large) FM126-1004 FM126-1000 ME860-6 (Bracket Style) ME861-6 (Lanyard Style)
RkJQdWJsaXNoZXIy NDE1MjE4