Retail Petroleum Equipment

Nominal Pressure Ultimate Internal Ultimate Pipe Size Rating 1 Pressure 1 Collapse Pressure 2 ( in) (mm) ( psig) (MPa) ( psig) (MPa) ( psig) (MPa) 2 50 300 2.07 3200 22.1 153 1.05 3 80 200 1.38 2400 16.5 90 0.62 4 100 175 1.21 2000 13.8 39 0.27 6 150 175 1.21 2000 13.8 38 0.26 1) At 150°F (66°C). 2) At 80°F (27°C). For continuous service do not exceed 75% of these values. Nominal Pipe Pipe i Wall Thickness Unit Pipe Pipe Size OD 1 ID Total Structural Volume Weight ( in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (gal/ft) (l/m) (lb/ft) (kg/m) 2 50 2.37 60 2.21 56 0.080 2.0 0.060 1.5 0.20 2.5 0.47 3.5 3 80 3.50 89 3.32 84 0.085 2.2 0.065 1.6 0.45 5.6 0.72 5.2 4 100 4.50 115 4.33 110 0.087 2.2 0.070 1.8 0.77 9.6 1.00 7.2 6 150 6.63 168 6.39 162 0.120 3.1 0.100 2.5 1.67 20.7 2.10 15.2 1) Typical outside diameters of 2 through 6-inch pipe are within API, ASTM and ANSI fiberglass and steel pipe dimensions. 2 Typical pipe dimensions and weights Typical pipe performance Fittings pressure performance Nominal Pipe Size All fittings 1 ( in) (mm) ( psig) (MPa) 2 50 250 1.72 3 80 150 1.03 4 100 125 0.86 6 150 100 0.69 1) Some fittings have higher pressure ratings than shown. For dimensions of fittings, consult Ameron publication D UALOY 3000/ L F ITTINGS D IMENSIONS , FP266. Pressure ratings of fittings without UL listing are available on request. Adapters: bell x NPT male 1 Adapters: bell x NPT female 2 Adapters: spigot x NPT female 2 Adapters: spigot x NPT male 2 45 ° Elbows 1 90 ° Elbows 1 End caps 1 Flange rings 1 Flange stub ends 1 Isolation bushings 1 Nipples 2 Reducer bushings 1 Repair couplings 1 Sleeve couplings 2 Tees 1 Dispenser pan penetration fittings 1 Fittings 1) Indicates molded fitting. 2) Indicates filament-wound fitting. 3) Other fittings available without UL listing.