Retail Petroleum Equipment

246 HIGHLIGHTS • The highly efficient electrofusion welding process that connects pipe, fittings, boots, and containment to create a seamless direct burial pipework system. • The UPP ® electrofusion welding process is safe and simple to complete in any climate and virtually any weather condition. An installer simply preps the components, fits them together attaching welder leads to the fitting, and then presses a single button on the welding unit to initiate the process. • The welder unit itself calculates the exact settings required to complete the weld, regardless of the pipework diameter or temperature, leaving no settings for the installer to input. • UPP ® double wall semi-rigid pipe is flexible enough to coil and bend like flexible pipe, while UPP ® single wall pipe is also rigid enough to be used in place of fiberglass pipe for vapor or vent lines. • Available in both coils and straight sticks, UPP ® pipe can accommodate the sweeping bends of a “loop” pipework system while the straight sticks make installation between dispenser sumps simple by providing a square pipe entry into containment. • The flexibility of UPP ® double wall semi-rigid pipe allows for easy installation through existing ducting. • As a vital component to the UPP ® pipework system, patented UPP ® electrofusion entry boots weld directly to the wall of any polyethylene sump creating a watertight seal between the pipework system and containment spaces. SPECIFICATIONS • Pipe outer layer: High Density Polyethylene (HDPE) grade PE100 • Pipe liner layer: Ethylene vinyl alcohol (EVOH) resin liner • Pipe intermediate layer: Tie-layer which permanently bonds HDPE outer layer to EVOH resin liner layer • Temperature rating: -22 °F to 122 °F • Primary pipe pressure rating: 90 psi • Secondary pipe pressure rating: 58 psi • 1½" and 2" double wall pipe bend radius: 3'3" • 3" and 4" double wall pipe bend radius: 13'2" • 2" single wall vent/vapor pipe bend radius: 3'3" • 3" single wall vent/vapor pipe bend radius: 9'10" • UL-971 approved for fuels including: • Motor vehicle fuels typically found in consumer dispensing facilities like gasoline or diesel including blended fuels with maximum 15% MTBE, 15% Methanol or 30% Ethanol. • Concentrated fuels such as alternate unblended fuels containing up to 100% concentrations of Toluene, Methanol or Ethanol. • High blend fuels with higher than normal gasoline blends with maximum 50% Methanol or 50% Ethanol. • Aviation and marine specialty fuels containing up to 100% kerosene or leaded gasoline. • Michigan, Wisconsin, and Florida EQ-816. UPP ® SEMI-RIGID PIPEWORK SYSTEMS Since being introduced as the world’s first electrofusion pipework system for fuel applications over thirty years ago, UPP ® brand semi-rigid pipework has become known globally as the standard for watertight electrofusion welded pipework systems. UPP ® brand pipework utilizes the advanced electrofusion welding process to effectively bond system components including pipework and containment together into one watertight system. UPP ® SEMI-RIGID PIPEWORK SYSTEM Hand-Held Electrofusion Welder Unit Electrofusion Entry Boot Fittings and Adapters Approvals