Retail Petroleum Equipment

VANCOUVER I NANAIMO I EDMONTON I CALGARY I SASKATOON I REGINA I WINNIPEG I MISSISSAUGA I MONTREAL I MONCTON I DARTMOUTH I ST.JOHN’S January 2025 Email: [email protected] 778.588.7635 250.753.4188 780.466.2171 403.735.1103 306.665.0223 306.721.1030 204.633.8569 905.670.8863 514.355.2366 506.861.1010 902.468.7342 709.747.0015 Retail Petroleum Equipment

www.nee.ca 1.866.574.5100 Proudly Serving you from Coast to Coast VANCOUVER 1467 Spitfire Place Port Coquitlam, BC V3C 6L4 Tel: 778-588-7635 Fax: 604-472-7180 REGINA 1415 Pettigrew Ave E Regina, SK S4N 5W1 Tel: 306-721-1030 Fax: 306-721-1034 NANAIMO 1940 Schoolhouse Road Nanaimo, BC V9X 1T4 Tel: 250-753-4188 Fax: 250-753-5477 WINNIPEG 1431 Church Avenue Winnipeg, MB R2X 1G5 Tel: 204-633-8569 Fax: 204-694-5027 CALGARY Bay R, 1350 - 42nd Ave SE Calgary, AB T2G 4V6 Tel: 403-735-1103 Fax: 403-735-2337 MISSISSAUGA 1850 Derry Road East Mississauga, ON L5S 1Y6 Tel: 905-670-8863 Fax: 905-564-9492 EDMONTON 17107-118 Avenue NW Edmonton, AB T5S 2V3 Tel: 780-468-4454 Fax: 780-465-3064 MONTREAL 8909 Henri-Bourassa Blvd. Est. Anjou, QC H1E 1P4 Tel: 514-355-2366 Fax: 514-355-2223 DARTMOUTH 1 Royles Avenue Dartmouth, NS B3B 2A6 Tel: 902-468-7342 Fax: 902-468-7341 SASKATOON 3610 Kochar Ave Saskatoon SK S7P 0C2 Tel: 306-665-0223 Fax: 306-665-1214 ST. JOHN’S 1 - 18 Dundee Avenue Mount Pearl, NL A1N 4R7 Tel: 709-747-0015 Fax: 709-747-0222 MONCTON 489 Adélard-Savoie Boulevard Dieppe, NB E1A 7E7 Tel: 506-861-1010 Fax: 506-861-1013 Toll Free National Directory

Retail Petroleum Equipment ‐ eCatalogue Air Dispensers ............................................ 4 ‐9 Excel Tire Gauges ....................................... 4 Canopies ............................................ 10 ‐ 17 Superior .................................................... 10 Cardlock Fleet Management Systems.. 18 ‐ 49 Computrol ................................................ 18 Fill‐Rite ................................................... 24 Gasboy ...................................................... 26 Dipsticks and Gauging Paste ............... 50 ‐ 52 B&K Tank Gauge ....................................... 50 Kolor Kut ................................................... 52 Energy and Facilities Management ..... 53 ‐ 68 Emerson Climate Technologies ................ 53 Gilbarco .................................................... 65 Filters, Spin On .................................. 69 ‐ 191 Cimtek ...................................................... 69 Petroclear ............................................... 140 Fuel Island Service Merchandising ... 192 ‐ 214 Gorrie ..................................................... 192 Mallory Squeegees ................................. 213 Fuel Dispensers ............................... 215 ‐279 Gasboy .................................................... 215 Gilbarco .................................................. 222 Hose ................................................ 280 ‐ 282 Goodyear Veyance ................................. 280 Hosebuns and Retrievers ......................... 283 Hosebuns ................................................ 283 Intercom Systems ............................ 284 ‐ 293 3M ......................................................... 284 Island Forms ........................................... 294 National Energy Equipment .................. 294 Lighting .......................................... 295 ‐ 302 Cree ....................................................... 295 Lube Oil Equipment ........................ 303 ‐ 394 Balcrank ................................................. 303 Nozzles ........................................... 395 ‐ 469 Catlow ................................................... 395 Husky ..................................................... 405 MMD Nozzle Talkers ............................. 461 OPW ....................................................... 462 Separators & Interceptors ............... 470 ‐ 480 Xerxes...................................... 470 Pipe Couplings & Fittings ................ 481 ‐ 482 Masters ................................................. 481 Piping Systems ................................ 483 ‐ 573 Ameron ................................................. 483 APT Franklin Fueling Systems ................ 491 Blueline Technologies ............................ 548 Hose Master ........................................... 550 UPP Franklin Fueling Systems .................. 55 Point‐of‐Sale Systems and Accessories .. 574 ‐ 599 AJB Payments ........................................ 574 Bulloch Technologies ............................. 577 Gilbarco ................................................. 583 Imcom .................................................... 585 Infonet Technologies ............................. 587 Insight .................................................... 588 National Energy Equipment .................. 596 Pumps, Consumer and Utility ......... 600 ‐ 614 Fill‐Rite ................................................... 600 Pumps Submersible Turbine ........... 615 ‐ 666 FE Petro Franklin Fueling Systems ......... 615 Red Jacket Veeder Root ......................... 658 Spill Absorbents and Containment ... 667‐686 Absorbents Midwest .............................. 667 Storage Tank Equipment ................. 687 ‐ 755 Dixon Bayco ........................................... 687 EBW Franklin Fueling Systems ............... 688 Fibrelite .................................................. 728 Morrison Bros ........................................ 734 National Energy Equipment ................... 754 Storage Tanks ................................. 756 ‐ 790 Clemmer ................................................ 756 Xerxes .................................................... 757 Tank Gauging and Leak Detection ... 791 ‐ 903 Incon Franklin Fueling Systems .............. 791 Veeder‐Root ........................................... 821

! " ! ! ### $%&'()*(+,-*&. +*/ +0)&1$%&'()*(+,-*&. +*/ 2 2 2 3 3 !4

! " ! ! ### $%&'()*(+,-*&. +*/ +0)&1$%&'()*(+,-*&. +*/ ! " ! !4 !

! " ! ! ### $%&'()*(+,-*&. +*/ +0)&1$%&'()*(+,-*&. +*/ ! # # !4

Material Specifications for Superior Canopy Corporation Pre-Fabricated Steel Canopies Structural Components Columns: Structural steel tubing shall be used. Square steel tube to be ASTM A500 Grade B with a minimum yield stress of 46,000 ksi. Round steel tube to be ASTM A500 Grade B with a minimum yield stress of 42,000 ksi. Size to meet or exceed specific project design load requirements. Provide each column with a 4” electrical access opening and cover plate. Base Plates: ASTM A36 – 1” Structural steel plate with a minimum yield stress of 36,000 ksi. Plate to be a minimum ¾” A572 Grade 50 thick with welded gussets. Shop fabricated with pre-punched or pre-drilled bolt holes. Top Plates: ASTM A36 structural steel plate with a minimum yield stress of 36,000 ksi. Plate to be a minimum of ¾” thick with welded gussets. Shop fabricated with pre-punched or pre-drilled bolt holes. Structural Framing: ASTM A992 – 50 ksi - 034 wide flange steel beams shall be used.

Structural Connections: ASTM A36 structural steel plates with a minimum yield stress of 36,000 ksi. All framing members shall be shop fabricated for bolted field assembly. Domestic ASTM A3525 high strength bolts shall be used. All ASTM A325 bolts shall be installed per the RSCS Specification for Structural ASC Manual of Steel Construction, Allow Stress Design, 9 th Addition. Flange and purlin bracing where required. Anchor Bolts: ASTM A572 or A490 Grade 50 threaded round stock with a minimum yield stress of 50,000 psi. 1 ¼” diameter x 36” long rod with a 90 degree, 6” minimum bent leg shall be used. Total bolt length 42”. Threaded projection above footing shall be 7”. Double nuts and washers for each bolt shall be provided, one set to be used for plumbing and leveling. Templates for setting anchor bolts shall be provided. Templates shall be removed before setting column on foundation. Painting: All framing members will be given one shop coat of drying red oxide primer, as per industry standards.

Deck Panels ASTM A653 Grade 50 with a minimum yield stress of 50 ksi having a G60 galvanized surface. 20 gauge, 16” wide x 3” deep steel panels. Panels are fastened to the wide flange beams with an engineered screw type clamp and lock nut system. No splicing of deck panels will be allowed. Panels shall have a finish side coated with a full coat of polyester paint baked on over an epoxy primer. A white wash coat of polyester baked on over an epoxy primer shall protect the reverse side. Panels to be manufactured in sufficient length to avoid unnecessary center gutters. Fascia Laminated Panels: 24 gauge sheet steel Factory pre-assembled in 10’ lengths No exposed fasteners on bottom or exterior face. Panel core material: 1” thick virgin expanded polystyrene in 1.23 PCF density. Panels shall have both sides finish coated with a full coat of polyester paint baked on over an epoxy primer. Backer sheet of laminated panel to be G60 galvanized sheet metal. ACM Panels: Aluminum composite material of varying thicknesses is available as an option for the laminated panels. ACM panels consist of 2 aluminum sheets laminated

Fascia Attachment Systems: Fascia support brackets to be 20 gauge galvanized steel. Break to form channel 1 ½” x 2” x 1 ½” x 8’ long. Accessories Gutter: Straight sections to be ASTM A653 Grade 50 with a minimum yield stress of 50 ksi and having a G60 galvanized surface. Straight sections 20 gauge steel and are 8” wide x 6” deep. Straight gutter section shall have a finish side coated with a full coat of polyester paint baked on over epoxy primer. A white wash coat of polyester paint baked on over epoxy primer shall protect the interior surface. Downspouts: External downspouts to be 4” x 3” roll formed 26 gauge steel with watertight locked seams. Exterior paint with one full coat of polyester paint baked on over epoxy primer. Downspouts to be of one contiguous length up to 15’. Collectors: Collectors to be circular and constructed of gel-coated fiberglass Internal Drains: 3” schedule 40 PVC. Hardware: Gutter to deck panel fasteners shall be #14 x ¾” long self drilling screws. Sealant: a. Tube sealant shall be 100% silicone and or urethane caulk.

General Notes All material is new and without defects which would lessen quality of work. All material will conform to requirements, tolerances, etc. of the latest editions of the AISC Manual of Steel Construction, AISI Specifications for general requirements for rolled steel plates, shapes, sheets, and bars for structural use, and AWS for welded connections. Permit drawings include required foundation plans. Building erection drawings to be furnished at time of shipment. Piece marks included for field identification of all major parts. Upon request, design calculations or a letter of design certification sealed by a registered professional engineer licensed in the state in which the job is located shall be provided. All A325 bolts shall be tightened by the turn of nut method.

Web-based Software Comprehensive Reporting Remote Management and Updates Real-time Transactions Rugged and Secure Terminal Management Dashboard TEL:+1-604-421-1001 TOLL-FREE:1-877-421-1001 EMAIL:[email protected] WWW.COMPUTROLFUEL.COM Simplify Complexity

Simcom is simplicity Intuitive and comfortable user experience with wizards that guide you step by step Dashboard shows critical information at a glance Smart terminal with a large color display and alphanumeric keypad Powerful and flexible reporting tools as standard features Speci cations All major browsers supported Platform available as hosted service or installed on-premise Microsoft SQL server database Dimensions: H 160 cm (63”) W 42 cm (16.5”) D 30 cm (11.8”) Weight: 15.4 kg (34 lbs) Electrical: 110-120 VAC 50/60 Hz Power Consumption: Less than 36 Watts Temperature: -40°C (-40°F) to 50°C (120°F) Humidity: 0-95% CSA Approved, NEMA R3 rated Simcom is the future now A Complete Management System Simcom is real-time Simcom is securely hosted in the cloud, accessible from any browser, from anywhere, anytime Terminals perform real-time authorizations and automatic data synchronization Implement business decisions instantly around access, volume and pricing Fall-back modes ensure that fueling continues even through communication interruptions Simcom is remotely configurable with updates delivered effortlessly Eliminate manual processes with automated tasks New features easily added as your operations grow and needs change State of the art security features protect your system and data integrity Simcom Platform & Database Network or Internet PC Mobile Simcom is knowledge Data-driven operations benefit from real-time knowledge of inventory and activity at all dispensing locations Easily manage operator and vehicle accounts, with multiple identification credentials available Data is easily viewed and shared with users and systems across the organisation Capture important additional data with every dispensing transaction Unlimited Fuel Sites Fuel Site #1 Tablet

Fill-Rite’s Fuel Management System combines hardware, a mobile application, and a web portal to give users real-time control over their fuel. Secure. Protect your fuel with driver-specific pin codes and robust tracking tools to identify and stop fraud or theft. Affordable. Automate tax refunds for off-road fuel use, all while paying a fraction of the cost of legacy fuel management systems with comparable features. Simple. Install in a day and take control with the intuitive app and web portal. Customize and automate reports. Expandable. Simply add modules to scale with your business. Each module supports unlimited drivers, vehicles, transactions, and users. Web Hardware Mobile NXFM100 Site Controller NXFM150 5 Hose Expansion Module Web Based. Access information from anywhere at any time. With our subscription-based service, updates and improvements happen automatically on a regular basis and you never have to pay extra for them. Available Models

www.fillrite.com | 800.634.2695 | 8825 Aviation Dr. Fort Wayne, IN 46809 FRFMS_SS_Rev0 2Mobile App Use the technology you already have The app works with the Android and iOS devices you use every day. No more cards! Secure your pumps Fuel access is gated behind driver-specific pin codes, helping protect you from theft and unauthorized transactions. Say goodbye to pen and paper All transaction data is uploaded to Fill-Rite FMS’s web portal, saving you the hassle of tracking down hand-written transaction sheets. The Fill-Rite FMS mobile app provides a portable, intuitive system for authorized users to access pumps. 3Web Portal Customized, automated reports and paperwork Collect the information you need at the pump to auto-complete reports and off-road fuel use tax forms. Instant visibility into all your tanks Check inventory levels and set permissions from one dashboard. Cloud-based software for access everywhere you work Your fuel data is available any time, anywhere, on any computer through your Fill-Rite FMS account. View real-time transactions and push out automatic updates to prevent fraud and control fuel use. Fill-Rite's web portal serves as your all-in-one fuel dashboard. Check inventory, run reports, and manage pump permissions from one place. Download the “Fill-Rite FMS” app! Try the demo to see just how easy full featured fuel management can be! 1Hardware Low cost, full featured The NXFM100 is a fraction of the price of existing fuel management systems thanks to modular components and ingenious software hosted in the cloud. Easy, modular installation Designed for both fixed and mobile applications, our hardware is compatible with most pump and meter brands and types and may be installed in as little as one day. The modular design easily scales with the growth of your business. Fill-Rite FMS hardware is compatible with most existing fuel pumps and meters. Installation is quick, simple and designed to scale with your business needs.

Worldwide leader in solutions for fleet and commercial markets. The Gasboy PLUS series is a new generation of fleet management systems for today’s operators. They’re the heart of your turnkey Gasboy fleet solution, with choices to get what you need today and build your system as your operation grows. Gasboy and technology partner Orpak® bring you world class performance in the PLUS series fleet management systems. All Gasboy products are supported by the world’s largest network of fleet product distributors and authorized service contractors. Superior technology and proven solutions add up to a better tomorrow. Gasboy® PLUS Series Fleet Management Systems Islander PLUS Advanced technology Proven solutions. Fuel Point PLUS

Complete solutions from a single supplier. You don’t have to construct your own system from different suppliers and take chances on compatibility and responsibility. Success is simple with turnkey solutions from Gasboy, a trusted supplier to fleet operators for more than 80 years. Fleet Head Office is Gasboy’s web-based, enterprise-wide software that consolidates data from multiple sites and generates superior management reports. > Manage your operation from anywhere: the office, home or on the road. > Customizable reports are easy to configure to your specific needs. > Schedule proactive vehicle maintenance based on accurate and timely information. > Set restrictions for specific vehicles or drivers per day/week/month, geographic location, fuel type and more CFN™ PLUS is Gasboy’s new generation webbased site controller. It’s the heart of your total, turnkey Gasboy solution for fleet and commercial (non-payment) applications. > Interfaces seamlessly to Fleet Head Office, Gasboy Atlas® dispensers, ICR PLUS, FuelPoint® PLUS and more > Hardened for the tough outdoor or indoor environment of fleet operations ICR PLUS is Gasboy’s island card reader for use with CFN PLUS. It supports multiple access technologies, including web-based and contactless systems. > Lighted terminals available 24/7/365 for unattended sites > Cost-effective way to offer functionality at multiple fuels islands at the same location www.gasboy.com

Islander™ PLUS combines the functionality of CFN PLUS and ICR PLUS in a single package hardened for the fuel island. > Cost-effective way to offer functionality at sites with a single fuel island > Lighted terminals available 24/7/365 for unattended sites > Supports multiple access technologies, including web-based and contactless systems FuelPoint® PLUS is the industry’s only truly wireless vehicle identification system. Gasboy’s highly secure, hands free, wireless vehicle identification, authorization and control system uses radio frequency identification. > Tamper resistant components assure nozzle is inserted into an authorized vehicle before fueling > Vehicle module provides accurate odometer readings and other information directly from the vehicle bus, eliminating human error > Eliminates the need for keys, cards, or vouchers that can get lost or be misused Fuel Truck Controller is a mobile fueling system that brings fleet fueling to heavy or stationary equipment from a tanker truck. It’s fully compatible with the other Gasboy PLUS series so that transaction information stored on the Fuel Truck Controller uploads into the Fleet Head Office when the tanker truck returns to the fuel island. > Extends your fleet management system to stationary equipment > Adds mobility to your system > Fully compatible with site controller and fuel island parts of the system Worldwide leader in solutions for fleet and commercial markets.

See it. Analyze it. Optimize it. Control every detail , every day with Islander PLUS. Data is your most powerful tool for building efficiency, creating consistency, and keeping costs down. So we built Islander PLUS to deliver it all, combining the CFN PLUS fuel controller and the ICR PLUS fleet card reader into one powerful package that gives you precisely the connectivity and control you need. But we didn’t stop there. Islander PLUS can also process that data in just about any way you choose and deliver it to you and your staff wherever you happen to be. So you’ll get the whole picture. Not to mention a whole new level of efficiency and savings. Track costs more precisely with a seamless connection to Gasboy Fleet Head Office. Collect data without slowing down your operation with support for multiple access technologies, including web-based and contactless systems. Stay up and running 24-7 with lighted terminals and secured access for unattended sites. Are you ready to see more? Talk to your sales rep or visit www.gasboy.com to see what Islander PLUS could do for you. Commercial & Industrial Solutions

Hardware 61.728 9.173 13.654 Dimensions are in inches. 10.701 9.488 Data Entry Options/Access Control Piezoelectric keypad, magnetic card reader, mifare card/tag reader, HID reader, Vehicle/Driver Identification System (Fuel Point PLUS), and dual Fleetkey readers. Available optional ruggedized thermal printer for purchase receipts printout. Dispenser Connection Options Islander PLUS can control up to 8 mechanical hoses or up to 64 electronic hoses. Supports over 50 different types of dispensers in use in many countries. Communication Options Support of large variety of communication links: cellular, dial-in modem, VPN, satellite, ADSL, wireless ethernet and more. Central Controller Embedded hardware platform designed to withstand the harsh fueling environment. It runs on an embedded operating system and uses a solid state Flash disk and RTC (Real Time Clock) with back-up, along with surge suppressors for transient and noise immunity. Power fail recovery mechanisms included. Additional Hardware Features > Weather-proof enclosure in order to sustain the harsh environment of a Home Base Station > Secured remote capabilities for monitoring, management and maintenance activities > Serial and Ethernet interface to Automatic Tank Gauge systems using the Veeder-Root Serial Interface Command Protocol > Advanced electronic support of mechanical dispensers, enabling pump with totalized, preset and price update Commercial & Industrial Solutions

The Islander PLUS application provides a highly flexible report utility for producing a wide range of data reports. So fleet managers and head office managers can review fueling transactions from different aspects and ascertain balance between sales and buys, fleet expenses, vehicle performance and more. Two different types of reports are available: Custom Reports Enable the user to generate reports performed in the location by the following profiles: > Transactions: Sums up transaction details in order and broken down by the selected field > Products: Sums up all data in the report by product, containing total transactions amount and quantity sold > Payment Mode: Sums up all data by payment whether Customer, Credit or Cash depending on the application settings Export Reports Enable the user to generate and export records of the transactions performed in the location by the following parameters: > Date range > Transactions: Differentiate by field name, format, width and precision > From last export Users can transfer the report in CSV, text or XML. They can set the delimiter, the decimal point notation and column names. The format column enables users to define specific formats, such as: date and time, left justification and zero padding for numbers. The reports can run manually or automatically. If they run automatically, the storage location is either FTP or Local Directory. Real Time Fueling Real Time Tank Level Real Time Reporting Remote Web Access Monitor, manage and maintain the Islander PLUS from anywhere. Web Access makes remote and secure management possible. No special management software is necessary. All you need is a standard PC with Internet. The technology is already integrated into the station controller. Head Office Fleet Head Office consolidates the data from multiple sites, centralizes management and generates reports, including exception reports. It also enables control of the limits and restrictions placed on the various fleet vehicles. And authorized fleet personnel are able to log-in remotely so they have the ability to control and manage wet stock inventory on all stations including orders, deliveries and reports. Restrictions and Limits We make it easy to control a fleet’s fuel expenses. By defining limits (day, week, month), maximum number of refueling (day, week, month) and setting restrictions (days of the week, fuel type, stations, time intervals), you can maximize profitability. And when you have multiple sites, the centralized Fleet Head Office can synchronize data so that the limits can be applied to all of your sites. Even in the case of communication failure, a site will be able to refuel for a predefined grace period (parameter) using the most recent limits stored in its database. Software System Reports Commercial & Industrial Solutions

Commercial & Industrial Solutions ELECTRONIC; 4 MECHANICAL PUMPS ISLANDER PLUS - PEDESTAL WITH UP TO: 8 MECHANICAL PUMPS Name Supply voltage Power consumption Operating temperature Storage temperature Humidity Dimensions Communication interface Pump control maximum current (4 solid state Relay Channels) Power supply output voltage to pulsar unit Pulsar supply maximum output current Pulsar input high level voltage Pulsar input high level sink current (@15V) In-use “on” level (input) In use “off” level (input) Islander PLUS 100/240 VAC 2A max -22 °F to +113 °F (-30 °C to +45 °C) -4 °F to +113 °F (-20 °C to +45 °C) (Option with printer) -40 °F to +158 °F (-40°C to +70 °C) 80% non-condensing 9.45”W x 61.02”H x 9.45”D (24x155x24 cm) RS-485 – 9600bps, Half-Duplex RS-232 Ethernet RJ-45 – 10 Mbps EIA 802.15.4 Motor maximum: 1 HP at 115 VAC or 2 HP at 230 VAC. Additional external relay must be used if pump motor exceeds these limitations. 12 VDC +/- 20% 80 mA max 9 to 15 VDC 3 mA 100-240 VAC, 50/60Hz, 2 W (20 mA) 0 to 20 VAC Islander PLUS 120/240 VAC 2A-1A max -40 °F to +104 °F (-40 °C to +40 °C) -4 °F to +104 °F (-20 °C to +40 °C) (Option with printer) -40 °F to +158 °F (-40°C to +70 °C) 80% non-condensing 9.45”W x 61.02”H x 9.45”D (24x155x24 cm) RS-485 – 9600bps, Half-Duplex RS-232 Ethernet RJ-45 – 10 Mbps EIA 802.15.4 Motor maximum: 3/4 HP at 115 VAC or 1.5 HP at 230 VAC. Additional external relay must be used if pump motor exceeds these limitations. 12 VDC +/- 20% 30 mA max 9 to 15 VDC 3 mA 100-240 VAC, 50/60Hz, 2 W (20 mA) 0 to 20 VAC Download full bid & spec on www.gasboy.com. View Islander PLUS video demo. P-7076 | Printed in the U.S.A. | © 2012 | 06122 | 7300 W. Friendly Ave., Greensboro, NC 27410 (336) 547-5000

The simplicity you want. The precision you demand. TopKAT PLUS TopKAT PLUS proves that sophistication can be simple. Order your Gasboy dispenser with TopKAT PLUS installed, and it goes to work; identifying every driver, monitoring every transaction, tracking every detail. No separate mounting base, no dedicated power lines. Just a steady stream of data that maximizes efficiency and keeps you in control. TopKAT PLUS demands little, but delivers a lot. It enables you to create a wide variety of customized restrictions, it delivers sophisticated reports, and it integrates seamlessly with your automatic tank gauge system. It can even deliver data to you anywhere in the world over the Internet. Track costs more precisely with a seamless connection to Gasboy Fleet Head Office. Collect data without slowing down your operation with support for multiple access technologies, including Web-based and contactless systems. Stay up and running 24-7 with lighted terminals and secured access for unattended sites. Are you ready to see what the simple sophistication of TopKAT PLUS could do for you? Talk to your sales rep or visit www.gasboy.com to learn more. Commercial & Industrial Solutions

Data Entry Options/Access Control Piezoelectric keypad, magnetic card reader, and mifare card/tag reader. Available optional ruggedized thermal printer for printout of purchase receipts. Dispenser Connection Options TopKAT PLUS can control up to two electronic hoses as a factory installed dispenser mount. As a pedestal mount, it can control up to two mechanical hoses or up to eight Gasboy RS-485 electronic dispenser hoses. Communication Options Supports a wide variety of communication links: cellular, dial-in modem, VPN, satellite, ADSL and more. Central Controller Embedded hardware platform designed to survive the harsh fueling environment. TopKAT PLUS runs on an embedded operating system and uses a solid state Flash disk and RTC (Real Time Clock) with backup, along with surge suppressors for transient and noise immunity. Power fail recovery mechanisms are included. Additional Hardware Features > Weatherproof enclosure to survive the harsh environment of a Home Base Station > Secured remote capabilities for monitoring, management and maintenance activities > Ethernet interface to Automatic Tank Gauge systems using the Veeder-Root Serial Interface Command Protocol > Advanced electronic support of mechanical dispensers, enabling totalized, preset and price updates Commercial & Industrial Solutions Hardware Dimensions are in inches. 16.5” 11.75” 11.4” 48” 59.4” Dimensions are in inches. 16.5” 29” 11.4” 54” 67.4”

The TopKAT PLUS application provides a highly flexible report utility for producing a wide range of data reports. So fleet managers and head office managers can review fueling transactions from different aspects and ascertain balance between sales and buys, fleet expenses, vehicle performance and more. Two different types of reports are available: Custom Reports Enable the user to generate reports performed in the location by the following profiles: > Transactions: Sums up transaction details in order and broken down by the selected field > Products: Sums up all data in the report by product, containing total transactions amount and quantity sold > Payment Mode: Sums up all data by payment whether Customer, Credit or Cash depending on the application settings Export Reports Enable the user to generate and export records of the transactions performed in the location by the following parameters: > Date range > Transactions: Differentiate by field name, format, width and precision > From last export Users can transfer the report in CSV, text or XML. They can set the delimiter, the decimal point notation and column names. The format column enables users to define specific formats, such as: date and time, left justification and zero padding for numbers. The reports can run manually or automatically. If they run automatically, the storage location is either FTP or Local Directory. Real Time Fueling Real Time Tank Level Real Time Reporting Remote Web Access Monitor, manage and maintain the TopKAT PLUS from anywhere. Web Access makes remote and secure management possible. No special management software is necessary. All you need is a standard PC with Internet. The technology is already integrated into the station controller. Head Office Fleet Head Office consolidates the data from multiple sites, centralizes management and generates reports, including exception reports. It also enables control of the limits and restrictions placed on the various fleet vehicles. And authorized fleet personnel are able to log-in remotely so they have the ability to control and manage wet stock inventory on all stations including orders, deliveries and reports. Restrictions and Limits We make it easy to control a fleet’s fuel expenses. By defining limits (day, week, month), maximum number of refueling (day, week, month) and setting restrictions (days of the week, fuel type, stations, time intervals), you can maximize profitability. And when you have multiple sites, the centralized Fleet Head Office can synchronize data so that the limits can be applied to all of your sites. Even in the case of communication failure, a site will be able to refuel for a predefined grace period (parameter) using the most recent limits stored in its database. Software System Reports Commercial & Industrial Solutions

The following physical, electrical and environmental specifications are applicable to the TopKAT PLUS: Name Supply voltage Power consumption Operating temperature Storage temperature Humidity Dimensions Communication interface Pump control maximum current (2 Solid State Relay Channels) Power supply output voltage to Pulser unit Power supply maximum output current Pulser input high level voltage Pulser input high level sink current (@15V) In use “on” level (Input) In use “off” level (Input) TopKAT PLUS 120/240VAC 1A max -40 °F to +104 °F (-40°C to +40 °C) -40 °F to +158 °F (-40°C to +70 °C) 80% Non-condensing 16.55”W x 11.39”H x 20.47”D (420.4 x 289.4 x 520 mm) RS-485 – 9600 bps, Half-Duplex RS-232 Ethernet RJ-45 – 10 Mbps Motor maximum: ¾ HP at 115 VAC or 1½ HP at 230 VAC Factory installed – switches motor relays 12 VDC +/- 20% 30 mA max 9 to 15 VDC 3 mA 100 – 240 VAC, 50/60 Hz, 2 W (20 mA) 0 to 20 VAC P-7077 | Printed in the U.S.A. | © 2012 | 05125 | 7300 W. Friendly Ave., Greensboro, NC 27410 (336) 547-5000 Commercial & Industrial Solutions Download full bid & spec on www.gasboy.com. View TopKAT PLUS video demo.

Fleet Management Bid Specification SP-7178 01/12 Gasboy│7300 W Friendly Ave│Greensboro, NC 27410 1 GASBOY Fleet and Fuel Management BID SPECIFICATIONS 1.0 General Requirements System manufacturer must have a minimum of ten (10) years’ experience in the design and manufacture of fuel management equipment. The proposed system must conform to ISO 9001:2000 standards for quality management systems. System shall be UL and cUL approved. The system must be expandable for future expansions in the number of: fuel sites, vehicles, drivers, dispensers and nozzles. System shall be Gasboy PLUS System or approved equal 2.0 Fueling Procedure The system shall allow automated and manual fueling. In the fully automated mode, all control, authorization and accounting operations will be conducted automatically by the fuel management system with no manual input required by the operator using the fuel facility. The automated fueling procedure shall be as follows: The system shall automatically identify the vehicle when the fuel nozzle is inserted into the vehicle’s fuel inlet. The system shall turn on the corresponding fuel dispenser only if the vehicle is authorized for fueling as determined by the site controller set of conditions as described hereafter. The system shall automatically suspend fueling if the nozzle is removed from the vehicle fuel inlet or no pulses are detected from the fueling pump. The system shall append to the same transaction if the nozzle is re-inserted into the same vehicle within a specified period of time. The transaction shall be terminated if the specified period of time elapses or if the dispenser is turned off. When vehicle data modules are installed, the controller shall store the fuel transactions, odometer reading and engine hour. The system shall also have the capability to capture other vehicle data such as idle time, speeding, distance, PTO, oil level and pressure, two auxiliary engine hour timers, engine temperature, tire pressure, fuel consumption and fuel level, a sudden drop in fuel level, and other On-Board Diagnostic (OBD) vehicle error codes into a centralized management and reporting system. In manual fueling, a contactless Mifare tag or Mifare card and/or Magnetic stripe card and a keypad shall be available as alternative method for initiating a fueling transaction. HID reader and Gasboy Fleet Keys shall be available as an option.

Fleet Management Bid Specification SP-7178 01/12 Gasboy│7300 W Friendly Ave│Greensboro, NC 27410 2 A two stage authorization process shall be provided by identifying both the vehicle and the driver prior to refueling. Both driver and vehicles IDs should be stored in the transaction. The two stage authorization process should be flexible enough to link the vehicle device either to a specific driver or to a list of drivers. 3.0 System Description 3.1 System Configuration The site controller shall be a stand-alone unit comprising all required peripherals including the central processing unit, display panel, pump control module, communication modules, and optional receipt printer. The site controller shall be web enabled to allow independent real-time control, monitoring and reporting via the web using user ID with password and SSL protected link (https://). In the automated mode, the passive fuel ring installed in the vehicle shall be used for automated fuel authorization. The site controller shall have a wireless gateway terminal to communicate to all forecourt devices including the wireless nozzle readers and vehicle data modules. The wireless nozzle reader shall communicate with the passive fuel ring for fuel authorization The wireless gateway shall communicate with the wireless vehicle data modules to retrieve data such as odometer reading, engine hours, and other OBD codes. The site controller shall communicate with a central high performance server or dedicated host PC computer for the purpose of centralized control and monitoring of multiple sites. Refueling shall take place regardless of the connectivity to the host computer. Refueling limits and restrictions shall be 'pushed' from the host computer to all fuel site controllers enabling off-line refueling with limits and restrictions also when communication is not available. A time limit should be provided for off-line activity to block possible 'break' of the limits by refueling in several sites through the off-line mode. 3.2 System Operation Upon insertion of the nozzle into the vehicle fuel inlet the wireless nozzle reader shall communicate with the passive fuel ring, retrieve data for fuel authorization, and transmit the data to the wireless gateway. If the vehicle has a vehicle data module installed, the wireless gateway shall detect the vehicle within 45 ft. and retrieve data such as an odometer reading, engine hours, and OBD codes from the vehicle data module. The wireless gateway shall append the fuel ring data to the vehicle module data and transfer it to the site controller. The site controller shall authenticate the data retrieved from the vehicle and check it against the existing set of limits and restrictions. If all conditions are met, the site controller shall authorize immediate refueling.

Fleet Management Bid Specification SP-7178 01/12 Gasboy│7300 W Friendly Ave│Greensboro, NC 27410 3 If the nozzle is removed during the refueling process, the wireless nozzle reader shall detect the removal and shall send an indication through the wireless gateway to suspend refueling. When the nozzle is reinserted within a specified (configurable) period of time, refueling shall resume. The site controller shall authenticate the data retrieved from the vehicle and check it against the existing set of limits and restrictions. If all conditions are met, the site controller shall authorize immediate refueling. If the nozzle is removed during the refueling process, the wireless nozzle reader shall detect the removal and shall send an indication through the wireless gateway to suspend refueling. When the nozzle is reinserted within a specified (configurable) period of time, refueling shall resume. At the end of the refueling process, the nozzle is reinserted into the dispenser cradle and the transaction data is sent from the site controller to the host computer. Vehicle not installed with passive fuel ring shall have the possibility to use manual authorizing devices including Mifare cards or tags, Magnetic cards, keypad entry, and optional HID cards and Gasboy Fleet Keys. 4.0 Site Controller - Islander PLUS/CFN PLUS 4.1 General . The site controller shall control up to 8 mechanical hoses in one terminal. Hose extension controls shall be available in modules of 4 hoses. The site controller must be capable of controlling up to 32 hoses at a single site and through one single terminal, either mechanical or electronic registration. . The site controller shall store up to 25,000 transactions and 50,000 vehicles/devices with the ability to set limitations and restrictions. The site controller shall be available for refueling 24/7. Site controller shall work in online and off-line modes, in case of communication failures with the FHO software. When communication is established again, the system shall synchronize data automatically. The site controller shall have an embedded hardware platform designed to survive the harsh fueling depot environment. The site controller shall use a solid state Flash disk and RTC (Real Time Clock) with back up, along with surge suppressors for transient and noise immunity. The system shall include a power fail recovery mechanism. The CPU shall have no edge connectors and no hard disk (no moving parts) The site controller shall have a high level data protection through two separate isolated TCP/IP Ethernet network ports. One port shall be used for site peripherals interface and the second port for external communication to the network (Remote access, host computer and 3rd party systems) protected by SSL security. The outside link could use a local modem connection through PPP protocol for TCP/IP communication, cellular, or dial-in type modems. The site controller shall have the following additional capabilities:

Fleet Management Bid Specification SP-7178 01/12 Gasboy│7300 W Friendly Ave│Greensboro, NC 27410 4  Secured remote capabilities for monitoring, management and maintenance activities  Flexible with all types of communication including TCP/IP, wireless Ethernet bridge modems, satellite communications, and dial-up analog modem.  Web enabled reporting and alarms for Tank Level Sensing (TLS) systems (Veeder Root-350 and VR-450 protocols)  Fuel management software for reconciliation reports  Accessible via Internet browser to control and monitor the system. No requirement to install dedicated software.  Real time web-based dynamic graphical monitoring and control of dispensers  Remotely open a pump and limit the quantity to a specific transaction  Able to update fuel price at a specific time  Remote maintenance, remote troubleshoot and remote software upgrades of the various components of the system The following physical, electrical and environmental specifications shall be provided:  Supply voltage: 100 – 240 VAC  Power consumption: 2A max.  Operating temperature: -22 F to +158 F (-30 C to +70 C)  Communication interface: RS-485–9600 bps, Half-Duplex, RS-232, Ethernet RJ-45-10 Mbps, EIA 802.15.4 4.2 Tank Level Sensing (TLS) Interface The site controller shall support Veeder Root TLS 350 and Veeder Root TLS 450 protocols The TLS will be connected to the site controller via TCP/IP communication port or the RS-232 port to allow fuel management capabilities The site controller shall have the possibility to define the following communication parameters; Baud rate, Parity, Data bit, Stop bit, Flow control The site controller shall collect the following data from TLS equipment:  12:00 midnight shift inventory volume for tanks  Tank inventory level ; CSLD (Leak Detection) status – Pass/Fail  Fuel delivery information; Water Level  Water levels, Temperature, Alarms (Leak, Overfill, Sump, Sensor, etc)  Alarms shall flash continuously on the main screen and could be sent via email 4.3 The Pedestal The pedestal shall be a slim (9.5”x9.5”x61”) powder coated metal designed for easy installation and service. The paint application for the entire pedestal terminal shall consist of a positive/negative charged ionization process for superior bonding. All materials shall be tested to sustain Oil, Fuel, Sun, Water and Salt.

Fleet Management Bid Specification SP-7178 01/12 Gasboy│7300 W Friendly Ave│Greensboro, NC 27410 5 The pedestal shall allow front door access for maintenance and wiring and shall enable flexible installation on the fueling island. The pedestal display panel shall consist of:  Top illumination utilizing an array of high intensity blue LED’s  5” wide x 1.6” high display window  4 lines, 20 characters (1/4” height) each, or optional graphic LCD  LCD operates well in all lightening conditions  16 functional keys. The keys shall be rugged and made of metal for higher reliability and longer life (flexible plastic key caps will not be acceptable).  The key’s sensors shall use piezoelectric technology for highest reliability  Magnetic Card Reader  Mifare Card/Tag Reader 4.4 Receipt Printer (optional) Optional outdoor receipt printer with 1,000 ft. paper roll including automatic paper cutter and alarms indicating low-paper and paper-out (alarms shall be available via email and displayed online with secured access) 4.5 Site Controller Software The system shall be based on web server technology and enable easy secured (SSL) remote access through the network using a standard PC with an internet browser, without the need for any other software application. The browser interface shall allow control and monitoring, maintenance activities, report generation with advanced filters and templates, graphical monitoring of fuel levels, on-line pump monitoring and more. The system shall provide flexibility when searching for data within the system without the need for prior knowledge in SQL or other query languages. The site controller shall support mechanical and electronic dispensers. All links shall be protected and isolated for maximum reliability. The system shall store transaction data as well as driver and vehicle records into its database using FLASH disk. Other critical data such as fueling limits and restrictions shall also be stored in the database. The system shall use the following authorization devices:  Passive fuel rings  Vehicle data modules  Mifare cards or tags  Mag. Cards (track 2 and 3)  Keyboard entry authorization  Optional HID reader

Fleet Management Bid Specification SP-7178 01/12 Gasboy│7300 W Friendly Ave│Greensboro, NC 27410 6 Optional heritage Gasboy Fleetkeys  Authorization schemes shall include the following scenarios:  Single device authorization  Two stage authorization (based on two authorization devices)  Add-on keyboard entries: PIN code, vehicle ID, odometer reading, engine hours The system shall have the option to collect data from driver before refueling, such as: PIN, Odometer, vehicle ID, etc. The system shall provide odometer reasonability checks The site controller shall allow the possibility to work offline with all limits and restrictions The site controller and the Fleet Head Office software shall allow heritage Gasboy Series 1000 Magnetic cards and Gasboy Fleetkey devices from existing systems to be read and fully integrated into the database of the site controller and FHO software. The 1000 series card and Fleetkey device data – for example, card or key format, fuel limits, fuel authorizations, System ID, PIN key, etc.- shall be read at first use and placed into a Negative list. When the site controller automatically uploads the transaction to the database, a new Positive device list table will be created in the site controller’s and FHO’s database. Once the device list is created then all future refueling will be fully automatic based upon the Positive list of accepted devices. System shall have the option to approve or decline refueling according to pre-defined limits and restrictions for the specific unit. Such limitations shall include:  Limit of daily, weekly and monthly refueling volume or sales amount.  Enable or disable vehicle refueling on specific days (weekdays for example) and/or specific time slots within a day (night time for example)  Limit the maximum refueling sessions for a specific vehicle per day, week or month.  Block specific stations for a specific vehicle (if vehicle is restricted for operation in a specific zone).  Restriction of specific fuel types for refueling of a specific vehicle. 5.0 Wireless Gateway - WGT The wireless gateway shall be installed in the site controller. The wireless gateway shall retrieve data from the passive fuel ring and the vehicle data modules. The wireless gateway shall decrypt the protected data and send the complete vehicle information to the site controller using a TCP/IP Ethernet link. The wireless gateway shall include two wireless channels (802.15.4) with two antennas that work simultaneously to overcome possible blocking of the RF or channel The wireless gateway shall communicate with the wireless nozzle reader and the vehicle data modules using a short range 2.4 GHz wireless communication. The wireless gateway shall identify the vehicle within 45 feet

Fleet Management Bid Specification SP-7178 01/12 Gasboy│7300 W Friendly Ave│Greensboro, NC 27410 7 6.0 Wireless Nozzle Reader - WNR The wireless nozzle reader shall not have any wires The wireless nozzle reader shall read the data off the passive fuel ring (mounted around the vehicle fuel inlet) and transmit the encrypted data over wireless link to the wireless gateway The wireless nozzle reader shall read the passive fuel ring using contact-less technology with antispoofing mechanism to protect against cloning of vehicle devices (recording the pattern that is transmitted by a specific vehicle and creating a clone). The wireless nozzle reader shall transmit the encrypted fuel ring data to the wireless gateway installed in the fuel island using a 2.4 GHz encrypted wireless network communication The wireless nozzle reader shall be a self-contained unit installed on the nozzle. No wires shall be connected to the wireless nozzle reader. The wireless nozzle reader shall have a customized design for most common nozzle types. A special version shall be available to fit high speed nozzles such as Posilock and Wiggins. The wireless nozzle reader shall fit onto existing fueling nozzles and cradles of most common dispensers. The wireless nozzle reader shall be designed from glass-reinforced nylon enabling it to survive harsh fuel environment, mechanical impacts and to withstand ozone, UV and strokes. The wireless nozzle reader shall survive multiple 4 feet drop test on concrete, fuel and oil materials, IP-54 rain and solar radiation. The wireless nozzle reader shall have a green LED light to indicate:  The wireless nozzle reader has detected a passive fuel ring  The wireless nozzle reader is in operation 7.0 Passive Fuel Ring - FuelOpass The passive fuel ring shall be mounted around the vehicle fuel inlet. The passive fuel ring encrypted data shall be read by the wireless nozzle reader using RFID contact-less technology. The passive fuel ring shall be a low cost device designed for vehicle identification and fuel transaction recording only. The fuel ring shall be made of an electrical coil encased in a molded plastic and attached to an ID chip. The fuel ring shall have the following characteristics:  Does not require a hard-wire connection to vehicle module  Passive transponder (No power source required)  No wiring  No RF interferences.  Easy to install (No professional man power shall be required)  Install within a few minutes  Available in various sizes to meet most vehicle requirements  The ID chip shall have an anti-theft and tamper resistant design that will destroy the ID chip when it is removed from the vehicle

Made with FlippingBook

RkJQdWJsaXNoZXIy NDE1MjE4