Petroleum Terminal Handling and Diesel Exhaust Fluid

EATON Aerospace Group TF100-80E May 2013 5 Option letters may be combined with the basic units, except as noted, to customize the valve to fit specific installation requirements. Note basic models referenced on page 2, “Model Descriptions” section. Option Description Option Description A Adds 10-mesh screen between upper and lower halves of the unit (81557-10) N Adds adapter kit for installing unit into 12 or 13-inch Avery Hardoll pits with 3-inch ANSI mounting flanges. Cannot be used with Options G, H, K or L. B Adds 20-mesh screen between upper and lower halves of the unit (81557-20) P Adds 4-inch spool piece to convert inlet flange to mate with 6-inch 300 lb ASA raised face flange (47199). Resultant valve height is 16 inches (special order on 60554-2D & 3D). C Adds six-position product selection (44290) Q Changes upper half housing (adapter) to one-piece ductile iron (special order - not available on Model 60554-3D) G Adds spool piece to convert inlet flange to mate with 6-inch 300 lb ANSI flange to meet IP standard (44364) (special order on 60554-2D & 3D) R Changes upper half housing (adapter) to two-piece ductile iron/stainless steel (not available on Model 60554-3D — special order) H Adds 4-mesh stone guard to inlet. Available only with Option G above (43578). S Changes upper half housing (adapter) to 316 Stainless Steel (43214-4) (special order) K Adds adapter kit to D, E or F options only, to mate Avery Hardoll 12 inch pits. Cannot be used with option U. T Adds fusible plug to air port to either E, F, J or U options only (not available on Option X) L Adds adapter kit to D, E or F options only, to mate Avery Hardoll 13 inch pits. Cannot be used with Option U. Y Adds lanyard quick release bracket assembly with valve stem assembly M Adds dry break (with bleed) to Option E, F, J or U air connection (not available on Option X) Z Adds actuator assembly with override Example: 60554BDGH — IP standard unit with 6-inch inlet, manually operated pilot valve, stone guard and 20-mesh screen Ordering Data Superseding Data Since the late 1960’s, Eaton’s Carter product line of hydrant valves have been manufactured in a number of different designs and models. Several of these models are no longer manufactured and spare part support has been discontinued. The list of hydrant valve model numbers (right) provides the superseding data to allow one to specify and procure the latest units of the series. Use this list to obtain the appropriate current model number (60554 or 61654) and then refer to the appropriate table of options for either Model 60554 or 61654 hydrant valves to complete the part number. (For Model 61654 options, see brochure TF100-86). Model Description Superseded by - Comments 60550 4x4-inch API adapter with manual butterfly isolation valve at inlet No longer supported with spare parts. Replace with appropriate Model 60554 hydrant valve. 60551 4x4-inch API outlet adapter with dual flapper, lanyard operated inlet valve No longer supported with spare parts. Replace with appropriate Model 60554 hydrant valve. 60552 Same as Model 60551 except added interlock to close hydrant should coupler be inadvertently removed No longer supported with spare parts. Replace with appropriate Model 60554 hydrant valve. 60553 4x4-inch API outlet adapter with air-operated inlet valve utilizing dual externally mounted cylinders No longer supported with spare parts. Replace with appropriate Model 60554 hydrant valve. 60554-1 Air-operated Model 60554 type hydrant valve except 6x4-inch with outer housings and poppet material per ASTM A536-72, grade 80-55-06 Spare parts common to standard Model 60554. For new orders use Model 61654EK (part number change only). 60554 SPECIAL/ 60554-2D Same as Model 60554 series except material for outer housings per ASTM A395 60555 Aluminum inlet to mate 6-inch 300 lb flange x 4-inch API outlet, in accordance with IP standard Spare parts support continues for all parts except inlet housing. Inlet housing can be replaced with a kit of current ductile iron parts. 61153 6x4-inch inlet mates 150 lb flange with API outlet adapter. Air-operated pilot with defueling capability and 10-mesh screen. Spare parts support continues. For new orders use Model 61654AJ (part number change only).

RkJQdWJsaXNoZXIy NDE1MjE4