4 EATONAerospace Group TF100-86F May 2013 Table of Options Various option letters may be combined with the basic model number to customize the valve to fit specific installation requirements Option Letter Description A Adds 10-mesh screen between upper and lower halves of the unit B Adds 20-mesh screen between upper and lower halves of the unit C Adds six-position product selection K Material (outer housing and poppet) - A536, grade 80-55-06 ductile iron (or equal), inlet flange has raised face (special order only) — Port of New York & New Jersey requirements M Adds dry break (with bleed) to Option E, F or J air connection (44731 Option M, B2K16-VB(S) DWC option MT) Q Changes upper half housing (adapter) to one-piece ductile iron (special order) R Changes upper half housing (adapter) to two-piece ductile iron/stainless steel (special order) S Changes upper half housing (adapter) to one-piece 316 stainless steel (special order) T Adds fusible plug to air port to E, F or J options only Z Adds actuator assembly with override Example: 61654BD — Standard unit with 6-inch inlet, two-piece aluminum/stainless steel upper housing, manually operated pilot valve, stone guard and 20-mesh screen Ordering Data Model Description Superseded by - Comments 60550 4x4-inch API adapter with manual butterfly isolation valve at inlet No longer supported with spare parts. Replace with appropriate Model 60554 hydrant valve. 60551 4x4-inch API outlet adapter with dual flapper, lanyard operated inlet valve No longer supported with spare parts. Replace with appropriate Model 60554 hydrant valve. 60552 Same as Model 60551 except added interlock to close hydrant should coupler be inadvertently removed No longer supported with spare parts. Replace with appropriate Model 60554 hydrant valve. 60553 4x4-inch API outlet adapter with air operated inlet valve utilizing dual externally mounted cylinders No longer supported with spare parts. Replace with appropriate Model 60554 hydrant valve. 60554-1 Air operated Model 60554 type hydrant valve except 6x4-inch with outer housings and poppet material per ASTM A536-72, grade 80-55-06 Spare parts common to standard Model 60554. For new orders use Model 61654EK (part number change only). 60554 SPECIAL/ 60554-2D Same as Model 60554 series except material for outer housings per ASTM A395 60555 Aluminum inlet to mate 6-inch 300 lb flange x4-inch API outlet, in accordance with IP standard Spare parts support continues for all parts except inlet housing. Inlet housing can be replaced with a kit of current ductile iron parts. 61153 6x4-inch inlet mates 150 lb flange with API outlet adapter. Air operated pilot with defueling capability and 10-mesh screen. Spare parts support continues. For new orders use Model 61654AJ (part number change only). Coupler Model Description 61525 4 inch API coupler with 90° elbow and various inlet thread options 60700-1 4 inch API coupler with direct operated pressure and deadman control located in a 90° elbow and various inlet thread options 60600/60600-1 4-inch API coupler with pilot operated pressure and deadman control located in a 90° elbow and various inlet thread options. (Model 60600-1 has excess flow control) 64702 Similar to Model 60700-1. For use with Digital Pressure Control System only 64800/64802/ 64804 4-inch API coupler with direct operated pressure and deadman control located in a new smaller 90° elbow with 2½ and 3-inch inlet thread options. Model 64802 coupler is used with Eaton’s Digital Pressure Control System. Model 64804 has excess flow control. 64900/64902 4-inch API coupler superseding Model 60700-1. Model 64902 is used with the Digital Pressure Control System. Mating Parts All Eaton hydrant valves with outlets in accordance with API Bulletin 1584 will operate with couplers noted in the table at right and with other manufacturers’ couplers designed to comply with API Bulletin 1584. Refer to catalog sheets for individual models for detail information. Superseding Data Eaton’s Carter product line has designed and manufactured a series of API style hydrant valves for over forty years. Several of the older models are no longer in production and spare part support has been discontinued. When replacing older equipment, refer to the table (right) to select a current model (Model 60554 or Model 61654) with desired features appropriate to the application. (For Model 60554 option details, see catalog sheet TF100-80).
RkJQdWJsaXNoZXIy NDE1MjE4