EATONAerospace Group TF100-76C June 2013 5 Model 60129-1 For installation on Eaton Model 60427, Whittaker Model F116/F117 or Avery Hardoll Model HU3000/ HU4000 nozzles or for line-mounted applications. The part number of a complete 60129-1 HECV will consist of four basic parts as shown at right. Ordering Data Part 3 One option numbers from Part 3 must be included to specify the type of inlet configuration desired, except when Option R is ordered. May be ordered with the inlet terminating in an adapter half only, if desired. In this case leave Part 4 blank. If a female half QD or dry break is desired, Part 4 must be completed. Part 2 The options shown (right) may be added as Part 2 of the part number as indicated above to order a unit to meet your requirements. 60129-1 Part 1 - Model number Part 2 - Option letter describing various changes to basic HECV Part 3 - Number and/or letter describing male adapter required to mate desired inlet configuration in Part 4 and/or ball valve type Part 4 - Letter describing the inlet thread type and size Option Description Option Description 6 Adds male adapter half to mate standard female QD Model 60679 and old style dry break QD Model 60672-1 7 Adds male adapter half to mate Model 61154 dry break Part 4 One of the following letters must be included as Part 4, as indicated, to specify the inlet thread and size. Option Description Option Description H Inlet thread — 2½-inch NPT M Inlet thread — 3-inch BSPP K Inlet thread — 2½-inch BSPP P Inlet thread — 2-inch NPT L Inlet thread — 3-inch NPT Examples: 60129-1 This unit is intended for use on Model 60427 nozzle or on 64049, 64348 or 64349 nozzles when a dual HECV setup is used 60129-14 45 psi (3.103 bar) HECV with inlet and outlet to mate Model 60427 nozzle (formerly ordered as 40680-45 or 60129-1-45) 60129-1C56K 55 psi (3.792 bar) HECV with 100-mesh screen, outlet to mate Model 60427 nozzle and inlet with 2½-inch BSPP QD 44646 For installation on Models 64348, 64200, 64349 or 64201 nozzles. This unit may also be used on older nozzle Models 61428 or 61429. It has ball swivel joints on both ends. Order this HECV by the model number 44646 followed by the desired spring setting, -35, -45 or -55. 47013 For installation on Model 64348 or 64349 nozzles, either in conjunction with a Model 64015 ball valve or when a dual HECV installation is desired. This HECV has a 6-bolt flanged inlet and a ball joint swivel outlet connection to mate the above nozzles. Order this HECV by model number 47013, followed by the desired spring setting, -35, -45 or -55. Option Description *A 40- mesh screen *B 60-mesh screen *C 100-mesh screen D Adds 2½-inch BSPP male straight outlet E Adds 2½-inch NPT female straight inlet **F Adds outlet adapter to mate Whittaker F116/F117 nozzle **3 Specifies 35 psi (2.413 bar) spring setting **4 Specifies 45 psi (3.103 bar) spring setting **5 Specifies 55 psi (3.792 bar) spring setting N Adds 2½-inch NPT male straight outlet R Adds inlet adapter to mate flight refueling disconnect T Adds adapter flange to outlet to mate military nozzle inlet W Inlet and outlet flanges to mate Whittaker F116/F117 nozzles * Options A, B and C only available when a male half from Part 3 or Option R is specified ** The spring setting number must be included at the end of part 2. If not specified, a 45 psi (3.103 bar) spring setting will be supplied.
RkJQdWJsaXNoZXIy NDE1MjE4