EATONAerospace Group TF100-78D May 2013 5 Part 3 The configuration of the inlet is defined by adding the appropriate number or number and option letter from the table (right) in conjunction with the appropriate option letter from Part 4 below. The nozzle may terminate in an adapter half only, if desired. In this case, leave Part 4 blank. To obtain a female half, quick disconnect (QD) or dry break, or to complete the specification of the ball valve outlet, Part 4 must be completed. Weights vary depending on inlet configuration selected in Part 4. Option Description Option Description 3 Adds ball valve (64015). Select inlet configuration from Part 4 to complete part number. 5 Adds male adapter half to mate 64001 QD swivel when used without HECV (any F option) (44700) D Adds glass inspection port to Option 3 ball valve 6 Adds male adapter half (43046) to mate std QD (43108) and old style dry break QD (60672-1) E Adds drag ring to Option 3 ball valve 7* Adds male adapter half to mate 61154 dry break when HECV (any F option) is used (44185) J Adds long spanner handle for use with Option 3 ball valve only. Order as part of each nozzle or see Model 64015 catalog sheet (TF100-88A) to order separately. 8* Adds male adapter half to mate 61154 dry break when used without HECV (any F option) (44700) R Adds defuel key for use with Option 3 ball valve only. Order as a part of each nozzle or see Model 64015 catalog sheet (TF100-88A) to order separately. 9 Adds male adapter half to mate high flow female QD (includes 100-mesh screen). Only available as complete QD with 3-inch JIS inlet thread (42275-3). Specify with Option U, Part 4. 4 Adds male adapter half to mate 64001 QD swivel when HECV is used (any F option) (44185) * Safety clip (p/n 210641) for the 61154 dry break QD is considered foreign object debris (FOD) and is not included on military nozzle assemblies, however, it can be added as a no cost option Option Description Option Description H Inlet thread — 2½-inch NPT N Inlet thread — 2-inch BSPP K Inlet thread — 2½-inch BSPP P Inlet thread — 2-inch NPT L Inlet thread — 3-inch NPT U Inlet thread — 3-inch JIS (only applicable with Option 9, Part 3) M Inlet thread — 3-inch BSPP (not available w/ Option 3 ball valve) Z Inlet thread — 3-inch JIS (only applicable with Option 6, Part 3) Examples: 60427CD6H Nozzle with 100-mesh screen, bonding cable and standard QD with 2½-inch NPT inlet thread 60427BDE3DEJRP Nozzle with 60-mesh screen, bonding cable, vacuum breaker, ball valve with glass inspection port, drag ring, operating spanner, defuel key and 2-inch NPT inlet thread 60427EF46 Nozzle with vacuum breaker, 45 psi (3.103 bar) HECV and male adapter to mate standard female QD Part 4 One of the following letters must be included as Part 4 to specify the inlet thread size (leave blank except for Option 9 in Part 3 if male adapter only is desired): 60427 Part 1 - Model number Part 2 - Option letter describing various changes to basic nozzle Part 3 - Number and/or letter describing male adapter required to mate desired inlet configuration in Part 4 and/or ball valve type Part 4 - Letter describing the inlet thread type and size The part number of a complete nozzle consists of four basic parts as illustrated below. Part 1 Basic model number. Options from parts 2, 3 and 4 must be added to achieve a complete unit. Basic unit weight: 6.3 lbs (2.857 kg) Part 2 The following options may be added as Part 2 of the part number as indicated above to order a unit to meet your requirement. Option Description Weight lbs kg Option Description Weight lbs kg *B Adds 60-mesh screen +0.05 0.023 G Adds 15-inch handles +1.5 0.680 *C Adds 100-mesh screen +0.05 0.034 †H Adds drag ring +.88 0.399 D Adds bonding cable (44311) +0.20 0.091 R Adds flight refueling male disconnect +1.8 0.816 E Adds vacuum breaker (41599) +0.10 0.399 S Stirrup handle package added +1.2 0.544 **F3 Adds 35 psi (2.413 bar) HECV +2.25 0.453 T Pressure gauge (no longer available) - - **F4 Adds 45 psi (3.103 bar) HECV +2.25 0.544 V Deletes handles (nozzle w/o handles) -1.0 -0.453 **F5 Adds 55 psi (3.792 bar) HECV +2.25 0.635 Z Arctic nose seal assembly temperatures -65°F (-53.88°C) - - * Options B and C only available when a male half or a ball valve from Part 3 or Option R is specified ** To obtain a nozzle with two HECVs, specify two options in series, F5F4 results in 55 psi (3.792 bar) and 45 psi (3.103 bar) units with the 55 psi (3.792 bar) unit assembled as the one nearest the inlet. If two HECVs with different pressures are required the higher pressure unit should be specified first. † Option H can only be used with any Option F Ordering Data
RkJQdWJsaXNoZXIy NDE1MjE4