7 JamesburyValve Solutions Threaded-End Ball Valves Series 4000 full and standard bore ball valves offer performance and versatility at an economical cost. Three end connections are available: threaded, socket-weld, and butt-weld. The Fire-Tite version is standard. Valves are either CWP or ANSI rated, and can be specially prepared for oxygen or high-vacuum service. The Eliminator™ Ball Valve The Eliminator ball valve incorporates large standard ports, fire-tested performance, rugged actuator support, and flexible-lip seats to provide application versatility that goes beyond many other low-cost valves. It is either CWP-rated with cold working pressures of up to 2000 psi (138 bar) or ANSI Class 600 rated up to 1480 psi (102 bar). It can also meet special requirements for oxygen, NACE, and chlorine. Series 4000 Ball Valve Series 2000 Ball Valve Clincher® Series 2000 ball valves are rugged high performance ball valves designed to handle an extremely wide variety of liquids, gases, and slurries. These valves are available in brass, carbon, and stainless steel. They are equipped to have an actuator mount and can be prepared for special service such as oxygen and high-vacuum. Series 4000 Standard Port Ball Valves Max. Maximum Body/Trim Sizes Pressure Temperature Materials Bulletin 1/2" – 1" (15 – 25 DN) 2500 psi 500 °F (260°C) Carbon Steel B105-1 (172 bar) 316 SS 1 1/4" – 2" (32 – 50 DN) 2250 psi Monel (155 bar) Hastelloy C 2 1/2" (65 DN) 1000 psi (69 bar) Series 4000 Full Port Ball Valves Max. Maximum Body/Trim Sizes Pressure Temperature Materials Bulletin 1/2" – 3/4" (15 – 20 DN) 2500 psi 500 °F (260°C) Carbon Steel B105-1 (172 bar) 316 SS 1" – 1 1/2" (25 – 40 DN) 2250 psi Monel (155 bar) Hastelloy C 2" (50 DN) 1000 psi (69 bar) Series 2000 Standard Port Ball Valves Max. Maximum Body/Trim Sizes Pressure Temperature Materials Bulletin 1/2" – 2 1/2" (15 – 65 DN) 800 psi 500 °F (260°C) Carbon Steel B102-1 (55 bar) 316 SS Brass Eliminator Standard Port Ball Valves Max. Maximum Body/Trim Sizes Pressure Temperature Materials Bulletin 1/4" – 2" (8 – 50 DN) 2000 psi 500 °F (260°C) Carbon Steel B101-2 CWP (138 bar) 316 SS 1/4" – 2" (8 – 50 DN) 1480 psi Monel ANSI-600 (102 bar) Hastelloy C
RkJQdWJsaXNoZXIy NDE1MjE4