EATON Aerospace Group TF100-88C May 2013 3 Option Letter Description Weight lbs (kg) Comments A Adds 40-mesh strainer +0.05 (.023) B Adds 60-mesh strainer +0.05 (.023) C Adds 100-mesh strainer +0.05 (.023) D Adds glass strainer inspection cover (47020-2) +0.07 (.032) Allows the inspection of the strainer with no spillage of fuel E Adds plastic drag ring protector +0.88 (.399) Recommended especially for hose reel mounted units H* Specifies 2½-inch NPT inlet +1.12 (.508) J Adds spanner wrench +0.31 (.141) Required to remove inspection lid (standard or option D). Also used to operate ball to inspection position K* Specifies 2½-inch BSPP inlet +1.06 (.481) L* Specifies 3-inch NPT inlet +1.50 (.680) N* Specifies 2-inch BSPP inlet +1.30 (.590) P* Specifies 2-inch NPT inlet +1.32 (.599) R Adds allen key to unlock defueling position stop +0.00 (0.00) Required only for use when defueling is necessary S Adds shortened operating handle +0.38 (.017) Used to operate ball valve only. Does not have spanner capability to remove inspection cover * Option H, K, L, N, or P must be included to achieve a completed ball valve Nozzle Mfr Nozzle Model Ball Valve — Comments Carter 60427 — all 64015 — possible additional options — A-D, E, H, J, K, N, P, R, S Avery Hardoll HU3000/HU4000 Carter 61428 — with or without 44646 HECV 64015F — possible additional options — A-D, E, H, J, K, N, P, R, S 61429/64349K — Option K 61429/64349 — all except Option K 64015U — possible additional options — A-D, E, H, J, K, N, P, R, S 64348 — without 47013 HECV 64015F — possible additional options — A-D, E, H, J, K, N, P, R, S 64348 — with 47013 HECV 64015 — possible additional options — A-D, E, H, J, K, N, P, R, S 6902 64015U — possible additional options — A-D, E, H, J, K, N, P, R, S Whittaker F116 F116/F116N/F117 64015T — possible additional options — A-D, E, H, J, K, N, P, R, S Examples: 64015DEH Ball Valve to mate Eaton Model 60427 Underwing Refueling Nozzle, Eaton Model 47013 Hose End Control Valve (HECV) or Avery Hardoll HU3000 nozzle. Includes a glass inspection port, drag ring and 2½-inch NPT inlet 64015EFJP Ball Valve to mate Eaton Model 61428 or 61429 Underwing Refueling Nozzle with a drag ring and 2-inch inlet. Spanner wrench operating handle furnished as a loose piece. 64015DKS Ball Valve to mate Whittaker nozzle models F116, F116N or F117. Includes a glass inspection port and 2½-inch BSPP inlet. Ball operating wrench (shortened) furnished as a loose piece. 64015HRU Ball Valve to mate military style nozzles (D-1/D-2) with 2½-inch NPT inlet. Allen key for unlocking defueling stop provided as a loose piece. Ordering Data Mating Parts Model 64015 Ball Valve is designed to be installed and function with Eaton’s underwing refueling nozzles, as well as Whittaker or Avery Hardoll nozzles, as shown in the table (right). Units for installation on a Zenith nozzle may be obtained by special order. Use the table (right) to decide upon the correct ball valve to use. The options shown at right may be added to the basic model number to achieve the desired configuration.
RkJQdWJsaXNoZXIy NDE1MjE4