EATONAerospace Group TF100-91C June 2013 3 Part 2 Options may be added as Part 2 of the part number as indicated (right) to order a unit to meet your requirements. Option Description Option Description *A Adds 40-mesh screen **F3 Adds 35 psi (2.415 bar) Hose End Control Valve (HECV) *B Adds 60-mesh screen **F4 Adds 45 psi (3.103 bar) HECV *C Adds 100-mesh screen **F5 Adds 55 psi (3.792 bar) HECV D Adds bonding cable U Adds round handle grip E Adds vacuum breaker * Options A, B and C only available when a male half from Part 3 is specified ** To obtain a nozzle with two HECVs, specify two options in series; F5F4 results in 55 psi (3.792 bar) and 45 psi (3.103 bar) units with the 55 psi (3.792 bar) unit assembled as the one nearest the inlet Part 3 The inlet is specified by adding the appropriate number from the table (right) in conjunction with the appropriate option letter from Part 4 below. The nozzle may terminate in a unisex coupling only, if desired. In this case leave Part 4 blank. To add a female half QD or dry break, Part 4 must be completed. Option Description Option Description 2 Adds unisex non-valved coupling to inlet of nozzle when no HECV is used K Adds dust cap to Option 2 or 3 3 Adds unisex non-valved coupling to inlet of nozzle when used with an HECV Part 1 The part number of a complete nozzle consists of four basic parts as illustrated at right. Ordering Data Part 1 - Model number Part 2 – Option letter describing various changes to basic nozzle 64049 Part 3 – Number describing the male adapter required to mate the desired inlet configuration Part 4 – Letter describing the inlet thread type and size Part 4 One of the following letters must be included as Part 4 to specify the inlet type and thread size or to add a dust cap to any of the inlet options: Option Description Option Description E Adds non-valved unisex coupling with 2-inch FNPT inlet (64051P) M Adds non-valved unisex coupling with 2½-inch FBSPP inlet (64051M) F Adds non-valved unisex coupling with 1½-inch FNPT inlet (64051R) N Adds valved unisex coupling with 2-inch FBSPP inlet (64052N) G Adds non-valved unisex coupling with 2-inch FBSPP inlet (64051N) P Adds valved unisex coupling with 2-inch FNPT inlet (64052P) H Adds non-valved unisex coupling with 1½-inch FBSPP inlet (64051S) R Adds valved unisex coupling with 1½-inch FNPT inlet (64052R) J Adds dust cap to any of the inlet configurations E-H, N, P-S S Adds valved unisex coupling with 1½-inch FBSPP inlet (64052S) U Adds non-valved unisex coupling with 2½-inch FNPT inlet (64051U) Examples: 64049CD2KEJ Underwing nozzle with 100-mesh strainer, bonding cable, inlet adapter to mate unisex coupling, with dust cap, and non-valved unisex coupling with 2-inch female NPT threaded inlet with dust cap 64049BEF43JP Underwing nozzle with 60-mesh strainer, vacuum breaker, 45 psi (3.103 bar) HECV, inlet adapter to mate unisex coupling and dry break (valved unisex coupling) with 2-inch female NPT threaded inlet and a dust cap to mate the dry break coupling
RkJQdWJsaXNoZXIy NDE1MjE4