2 EATONAerospace Group TF100-100C May 2013 Eaton’s Carter product line of ground fueling equipment includes several underwing refueling nozzle models. Building on the success of earlier Carter Model 64348, the lightweight and rugged Model 64200 Pressure Refueling Nozzle is designed to increase durability and decrease maintenance costs.Model 64200 uses the same accessories as the earlier Model 64348 nozzle. All of these accessories now have stainless steel wear rings in swivel ball joints. The interlock mechanism is internal to the nozzle body, therefore there are no pins to wear aircraft adapter slots. It has no collar or other moving parts on the exterior of the nozzle (with the exception of the operating lever), thereby reducing the need to replace worn components. The handles are made of a very rugged standard composite material and do not include any metal, thereby eliminating potential bending of the handles. Options include a “U” bracket for nozzle stowage and a one-piece stirrup handle with stowage capability — no need to use the aircraft adapter or a special type of stowage device. The operating lever, replaceable from the exterior of the nozzle and made of less expensive, more ductile material, is backed up with a boss on the nozzle body to prevent bending. The operating lever has a replaceable knob to eliminate razor-sharp abrasion wear patterns prevalent on competitor’s nozzles. The lever has also been designed to turn in a counter-clockwise direction (the earlier Model 64348 was clockwise). This eliminates interference with some aircraft that are not designed to standards. Features yy Connects to 3-lug international standard aircraft adapter yy Self-adjusting pressure- loaded nose seal. No mechanical adjustments or springs used. yy Sampling fitting installation is standard yy Leak-free under extreme side loads, worn adapters and extreme temperatures yy Low pressure drop yy Two threaded ports in nozzle body for simultaneous vacuum breaker and product sampling yy 2, 2½ and 3-inch NPT and BSPP threaded quick disconnect (QD) inlets available yy Optional 40, 60 & 100-mesh screens retained with snap ring for ease of removal yy 35 psi (2.413 bar), 45 psi (3.103 bar) and 55 psi (3.792) Hose End Control Valves (HECV) available. See catalog sheet TF100-76 for detailed information. yy Double redundant safety lock on/easy off QD yy Easier swiveling under all conditions. Swivel independent of QD. yy Choice of ball valve or dry break disconnect for easy strainer inspection available Design Concepts Model 64200BR6H Includes 60-mesh screen, holder bracket, male adapter and standard quick disconnect Model 64200B2F46H Includes 60-mesh screen, 45 psi (3.103 bar) HECV with swivel end, male adapter and standard quick disconnect with 2½-inch NPT thread inlet
RkJQdWJsaXNoZXIy NDE1MjE4