EATONAerospace Group TF100-100C May 2013 3 64200 Part 1 - Model number Part 2 - Option letter describing various changes to basic nozzle Part 3 - Number and/or letter describing male adapter required to mate desired inlet configuration in Part 4 and/or ball valve type Part 4 - Letter describing the inlet thread type and size Part 1 Basic model number. Options from Parts 2, 3 and 4 must be added to achieve a complete unit. Option Description Option Description *A Adds 40-mesh screen K Long crank handle (cannot be used with Option 3 alone – may be used when combined with Options F and/or Option 3). *B Adds 60-mesh screen L Circular handle *C Adds 100-mesh screen P Pressure gauge/gauge protector bar D Adds bonding cable Q Adds fuel sample QD (GTP-235-3/8) E Adds vacuum breaker R Adds interlock mounting bracket **F3 Adds 35 psi (2.413 bar) HECV S Holder bracket (not needed with Option U) **F4 Adds 45 psi (3.103 bar) HECV T Adds male adapter to mate Whittaker F577/F582 inlet **F5 Adds 55 psi (3.792 bar) HECV U Replaces stick handles with stirrup handle with integral interlock bracket G Replaces standard handles with long handles V Handle, UK style H Adds drag ring. To be used with Options F and 2. When Option 2 is not specified, it is applicable to Option 6 or T with F only. Not to be used with Option 1. W Grounding cable assembly with clip and plug J Adds adapter to mate to 60427 style QD Y Adds swivel elbow * Options A, B, C only available when a male half or a ball valve from Part 3 is specified ** To obtain a nozzle with two HECVs, specify two options in series. F5F4 results in 55 psi (3.792 bar) and 45 psi (3.103 bar) units with the 55 psi (3.792 bar) assembled as the one nearest the inlet. If two HECVs with different pressures are required, the higher pressure unit should be specified first. Part 2 The following options may be added as Part 2 of the part number as indicated above to order a unit to meet your requirements. Ordering Data
RkJQdWJsaXNoZXIy NDE1MjE4