4 EATONAerospace Group TF100-100C May 2013 Ordering Data Option Description Option Description *1 Specifies 60427 flanged-type accessory pad on HECV R Adds ball valve defuel operating key *2 Specifies ball swivel end to HECV 4 Adds male adapter, swivel QD **3 Adds ball valve (64015). May be combined with Options D, E, J and R to achieve desired configurations. 6 Adds male adapter half to mate standard QD (44316) D Adds glass inspection port to ball valve 7 Adds male adapter half to mate Model 61154 Dry Break QD (44185 with HECV; 44697 without HECV) E Adds drag ring to ball valve 9 Adds male adapter half to mate 60427 style QD (43046 with HECV; 44362 without HECV) J Adds ball valve operating handle. (If short handle is desired see catalog sheet TF100-88 for order details). * If no inlet adapter (Options 6, 7 or 9 or ball valve Option 3) are specified and a HECV(s) is specified, it is necessary to indicate the inlet configuration, either Option 1 or 2, as noted ** The inlet size and configuration option from Part 4 must be included in the part number with Option 3 to achieve a completed nozzle and ball valve Part 3 The configuration of the inlet is defined by adding the appropriate number or number and option letter from the table (right) in conjunction with the appropriate option letter from Part 4 below. The nozzle may terminate in an adapter half only, if desired. In this case, leave Part 4 blank. To obtain a female half, quick disconnect (QD) or dry break, or to complete the specification of the ball valve outlet, Part 4 must be completed. Option Description Option Description H Inlet thread — 2½-inch NPT N Inlet thread — 2-inch BSPP K Inlet thread — 2½-inch BSPP P Inlet thread — 2-inch NPT L Inlet thread — 3-inch NPT Z 3-inch JIS female disconnect M Inlet thread — 3-inch BSPP (not available with Option 3) Part 4 Options specifying the desired thread for adapters or ball valves selected in Part 3, above. Examples: 64200CDF4HR6H Basic nozzle with a 100-mesh strainer (C), vacuum breaker (E), 45 psi (3.103 bar) HECV (F4), drag ring on the HECV (H), interlock “U” bracket (R), standard disconnect (6) with 2½-inch NPT female inlet thread (H) 64200CF5F5U6K Basic nozzle with a 100-mesh strainer (C), dual 55 psi (3.792 bar) HECVs (F5F5) (one closest to the nozzle will have a single swivel, one farthest from the nozzle will be flanged both ends), stirrup handle (U), standard disconnect (6) with 2½-inch BSPP inlet thread (K) 64200CF43DEJR6K Basic nozzle with a 100-mesh strainer (C), 45 psi (3.103 bar) HECV (F4) (flanged inlet), flanged outlet ball valve (3) with glass viewing port, drag ring (E), operating handle (J) and defuel key (R) with 2½-inch BSPP inlet thread
RkJQdWJsaXNoZXIy NDE1MjE4