2 EATON Aerospace Group TF100-101D May 2013 Eaton’s Carter product line is the leading supplier of nozzles qualified in accordance with SAE AS5877 (MIL-N-5877). Carter Model 64201H is listed as being qualified on the QPL. The specification defines four nozzles, D-1, D-1R, D-2 and D-2R. The D-1 and D-1R nozzles have an inlet body that includes a 45° elbow. The D-1R is a D-1 with the addition of a hose end regulator. The D-2 and D-2R (includes a regulator) have straight inlets. Both units have a military standard 6-bolt inlet flange in accordance with MS33786-40. In addition, Model 64201 can be purchased with various options to tailor a nozzle to fit the system requirements. These additional options, although widely utilized in the military, are not covered by any particular specification. Model 64201 is also now available with a new D-3 style inlet. This new inlet design makes it possible for the user to switch from the D-1 to the D-2 configuration and vice versa, simply by swiveling the inlet to the desired position. No tools are needed. The new D-3 inlet has been qualified in accordance with SAE AS5877, is approved for use and is listed on the QPL. This option can be procured as Option N to the basic nozzle and it would replace either Option H (45° elbow) or Option J (straight inlet). Features � All accessories have stainless steel wear ring in swivel ball joint � Interlock mechanism internal to nozzle body — no pins to wear aircraft adapter slots � No collar or other moving parts on exterior of nozzle with the exception of the operating lever � Fewer parts in nozzle will result in lower maintenance costs � Replaceable knob on operating handle to eliminate razor-sharp wear patterns prevalent on competitors’ nozzles � Very rugged standard composite material installation handles do not include any metal, eliminating potential bending of the handles � New options include “U” bracket for nozzle stowage and one-piece stirrup handle with stowage capability — no need to use an aircraft adapter as a stowage device Design Concepts � Operating lever opens nozzle in a counter-clockwise direction (Model 64349 was clockwise). This eliminates interference with some aircraft that are not designed to standards. � Operating lever replaceable from exterior of nozzle and is made of less expensive more ductile material. Also backed up with boss on nozzle body to prevent bending. Features Common to Model 64349 & 64201 Nozzles � Easier swiveling under all conditions � Swivel independent of quick disconnect � Connects to 3-lug international standard aircraft adapter � Self-adjusting pressure loaded nose seal � No mechanical adjustments or springs used. Leak free under extreme side loads, worn adapters and extreme temperatures. � Two threaded ports in nozzle body for simultaneous vacuum breaker and product sampling fitting installation are standard � Lightweight and rugged � Use of bolt flanges minimized � Modular construction � 2, 2½ and 3-inch NPT threaded quick disconnect inlets available � Optional 40, 60 and 100- mesh screens retained with snap ring for ease of removal � 35, 45 and 55 psi (2.413, 3.103 and 3.792 bar) hose end regulators available � Choice of ball valve or dry break disconnect for easy strainer inspection available � Bonding cable, vacuum breaker (optional) � Double redundant safety lock on/easy off quick disconnect (QD) � Low pressure drop
RkJQdWJsaXNoZXIy NDE1MjE4