4 EATONAerospace Group TF100-106D May 2013 The part number for a complete nozzle consists of four parts as illustrated (right) and described below. 64348 Part 1 - Model number Part 2 - Option letters describing various changes to basic nozzle Part 3 - Number and/or letter describing the various adapters, ball valves and other accessories as noted below Part 4 - Letter describing the inlet thread type and size Part 2 The following options may be added as Part 2 of the part number as indicated above to order a unit to meet your requirement. Option Description Option Description *1 For nozzle with flanged inlet HECV R Adds defuel key with Option 3 only *2 For nozzle with swivel inlet HECV 4 Adds male adapter half (44697) to mate with basic nozzle and dry break QD (61154) 3 Adds ball valve (64015). Part 4 must be completed with option 3. Add options D, E, J and R for other accessories to complete the specification. 6 Adds male adapter half to mate standard QD D Adds glass inspection port to ball valve 7 Adds male adapter half to mate dry break QD when a single HECV is used E Adds drag ring to ball valve 9 Adds male adapter half (43046 with HECV, 44362 without HECV) to mate 60427 style QD J Adds operating handle with Option 3 only * If Option 1 or 2 is not used with any other option, then the shortest configuration nozzle will be provided Part 3 The configuration of the inlet is defined by adding the appropriate number or number and option letter from the table (right) in conjunction with the appropriate option letter from Part 4 below. The nozzle may terminate in an adapter half only, if desired. In this case, leave Part 4 blank. To obtain a female half, QD or dry break, or to complete the specification of the ball valve outlet, Part 4 must be completed. Option Description Option Description *A Adds 40-mesh screen G Replaces standard handles with long handles *B Adds 60-mesh screen H Adds drag ring to nozzle with any Option F in conjunction with option T or Options 1 or 6 from Part 3 *C Adds 100-mesh screen J Adds adapter to allow mating to 60427 QD D Adds bonding cable Q Adds fuel sample QD (GTP-235-3/8) E Adds vacuum breaker ***R Adds flight refueling adapter **F3 Adds 35 psi (2.413 bar) HECV T Adds adapter to mate with Whittaker accessories **F4 Adds 45 psi (3.103 bar) HECV U Replaces standard handle with circular handle **F5 Adds 55 psi (3.792 bar) HECV * ** *** Options A, B and C only available when a male half from Part 3 or Option R is specified To obtain a nozzle with a dual HECV setup, specify two options in series, e.g. F5F4 results in 55 psi (3.792 bar) and 45 psi (3.103 bar) units with the former assembled nearest the nozzle inlet. If two HECVs are desired specify the highest pressure setting first. Option R only available with 47013 HECV Option Description Option Description H Inlet thread — 2½-inch NPT M Inlet thread — 3-inch BSPP (not available with Option 3 ball valves) K Inlet thread — 2½-inch BSPP P Inlet thread — 2-inch NPT L Inlet thread — 3 inch NPT Part 4 Options specifying the desired thread for adapters or ball valves selected in Part 3. Examples: 64348CD6H Nozzle with 100-mesh screen, bonding cable and standard QD with 2-½ inch NPT inlet thread 64348BF41 Nozzle with 60-mesh screen, 45 psi (3.103 bar) HECV with inlet flange to mate 60427 type accessories. Note — no inlet QD or other configuration is specified in this case. 64348F514P Nozzle with 55 psi (3.792 bar) HECV with flanged adapter half and 61154 dry break with 2 inch NPT inlet. Note — swivel adapter half can be specified by using 64348F524P. Ordering Data
RkJQdWJsaXNoZXIy NDE1MjE4