EATON Aerospace Group TF100-93D May 2013 3 Technical Data Pressure Compensation and Line Pressure Drop Model 60559 1. Pressure drop for min compensation 2. Pressure drop for max compensation 3. Min compensation 4. Max compensation Installation Note To meet the performance shown in this bulletin, allow a minimum length of straight pipe on the inlet and outlet equal to 3.5 times the pipe diameter. Allow more straight piping if installed before or after elbows or tees. Anything less will result in poorer performance. Pressure Compensation and Line Pressure Drop
RkJQdWJsaXNoZXIy NDE1MjE4