4 EATONAerospace Group TF100-104E May 2013 The basic part number for the Digital II Pressure Control System is 64235. This part number covers only the main control system and ancillary parts are needed to complete the system as noted in the following tables. PART NUMBER DESCRIPTION QTY COMMENTS 64235 Digital II Control System 164236 Hand-Held calibration unit, complete with cables 1 Only one calibration unit is required per airport for this type of system 64101 Transducer for test rig 1 Required for setting up and calibration 64108 Vehicle Transducer 1 To be mounted on vehicle 64504 or 64514 3 or 4-inch Inline control valve as appropriate 1 Model 64504 — 3-inch. Model 64514 — 4-inch. See separate catalog sheet (TF100-112) for detail information 64237 or 64338 Remote Display (optional) 1 Model 64237 is LCD-type and Model 64338 is LED-type remote display. This is to be used for mounting at a remote location such as a deck. 767181 327 Veeder Root pulser 1 Mounting kit part number 0370020 009 may be required. Any brand pulser that produces pulses from 10-100 pulses per gallon/liter can be used; however, if one that produces less than 100 pulses is used, the unit will have to be calibrated. Dual Digital II system for refuelers —The following parts must be ordered to complete a system. Note: The required pulser is not manufactured by Eaton and must be ordered from another supplier (Veeder Root or other — see below). Single Digital II System for Refuelers —The following parts must be ordered to complete a system. Note: The required pulser is not manufactured by Eaton and must be ordered from another supplier (Veeder Root or other — see below). PART NUMBER DESCRIPTION QTY COMMENTS 64235 Digital II Control System 2 — 64236 Hand-Held Calibration Unit, complete with cables 2 Only one calibration unit is required per airport for this type of system 64101 Transducer for test rig 2 Required for setting up and calibration 64108 Vehicle Transducer 2 To be mounted on vehicle 64504 or 64514 3 or 4-inch inline control valve as appropriate 1 Model 64504 — 3-inch. Model 64514 — 4-inch. See separate catalog sheet TF100-112 for detail information. 64505 or 64515 3 or 4-inch Bypass Control Valve as appropriate 1 Model 64505 — 3-inch. Model 64515 — 4-inch. See separate catalog sheet TF100-112 for detail information. 64237 or 64338 Remote Display (optional) 1 Model 64237 is LCD type and Model 64338 is LED type remote display. This is to be used for mounting at a remote location such as a deck. 64337 Switchable Remote Display (optional) 1 Model 64337 is a remote display that can be used as the primary display with the two control systems mounted out of sight of the operator. A separate 64338 would be used as the other display. 767181 327 Veeder Root pulser 1 Mounting kit part number 0370020 009 may be required. Any brand pulser that produces pulses from 10-100 pulses per gallon/liter can be used; however, if one that produces less than 100 pulses is used, the unit will have to be calibrated. Ordering Data
RkJQdWJsaXNoZXIy NDE1MjE4