2 EATONAerospace Group TF100-116C June 2013 Special Tools Some of Eaton’s Carter line of ground fueling products require special tools to maintain and overhaul them. In some instances, the use of special tools will simply make the job faster and easier. This brochure outlines those special tools that are essential to maintaining these products. 60554ST1 Hydrant Outlet Wear Gauge This gauge is now available to check for wear on the interface of Eaton hydrant pit valves made in accordance with API Bulletin1584, 3rd Edition. Refer to the appropriate service manual for instructions. 61362 Hydrant Coupler Lower Half Wear Gauge This gauge is used to determine if any one of several parts used in the lower half of hydrant coupler models 61525, 60600, 60600-1, 60700-1, 64800, 64802, 64804, 64900 or 64902, designed in accordance with API Bulletin1584, are worn beyond useful life. It should be used at each overhaul to determine the useful life of the lugs, body or collar used in these couplers. A new addition to the gauge provides definitive information on the condition of the lugs. Refer to the appropriate service manual for instructions. 61607 Ball Tool for Models 64348/64349/61428 & 61429 Refueling Nozzles The ball removal and installation tool is utilized to collect and automatically count the balls used in the swivel joints of the nozzle. It is simple to use and assures that the proper installation is achieved. It is suggested that a separate tool be used for each swivel joint. A minimum of two are required for the simplest of nozzle configurations (one for the collar swivel and one for the hose swivel). Three are required for a nozzle having a hose end control valve (HECV) or a ball valve. TF64191-2 Compression Spring Tool The compression spring tool is used to safely relieve pressure from and allow removal and reinstallation of the large breakaway spring in the probe half of Model 64191 7-inch Emergency Breakaway Coupling. Additional tools are available for use in overhauling probe assembly 64191-1 and receiver assembly 64191-2 components: • Part number TF64191-4 seal installation sleeve • Part number TF64191-5 male adapter test assembly tool • Part number TF64191-6 female adapter test assembly tool • Part number TF64191-7 hand tool set for 64191-1 • Part number TF64191-8 hand tool set for 64191-2
RkJQdWJsaXNoZXIy NDE1MjE4