7 FDPM® (Flow Differential Pressure Module) AUTOMATIC CALCULATION OF CORRECTED DIFFERENTIAL PRESSURE FOR VARYING FLOW RATES The FDPM® MK II builds on its field tested predecessor. Designed to comply with the requirements of industry standards such as A4A 103 and JIG Guidelines, the FDPM® MK II eliminates this normally complicated calculation by automatically calculating the condition of the filters inside a vessel based on the inputs from differential pressure and flowrate sensors. FDPM® MK II can be used with either mobile or stationary equipment. DPM™ (Differential Pressure Module) DIFFERENTIAL PRESSURE MONITORING AND SHUTDOWN SYSTEM The DPM continuously monitors the differential pressure between the inlet and outlet of a filter monitor or filter water separator vessel in order to evaluate the condition of internal filter elements. In the event that the filter differential pressure reaches maximum allowable pressure, the industrial strength relay on board the DPM control unit breaks the deadman circuit, immediately terminating the refueling operation. The system can only be overridden/reset by inserting a supervisor key. The DPM can also be placed in an override status in order to conduct the required DP Gauge free movement test. icountACM20 STATEOFTHEART FUEL CONTAMINATION MONITORING. THE FIRST FULLY FUNCTIONAL PARTICLE COUNTER APPROVED FOR USE ON AVIATION FUELS. The icountACM20 Portable Particle Counter has been developed from existing technology for monitoring contamination in AVTur and other hydrocarbon fuels, in accordance with Energy Institute (EI) Method IP 564. In addition, the ACM can also be used to monitor fuels from existing sampling points in locations from refineries, pipelines, distribution terminals, fuel supply storage.
RkJQdWJsaXNoZXIy NDE1MjE4