9 CARTRIDGE SELECTION TABLE Model Number O. D. in. Length in. End-Cap Type Maximum Flow Rate (USGPM) Interchange Information ACI-61401P 6 14 ½ 3 ½” ID OpenEnds 58 CC-N18, CA14-3, CA14-9 ACI-61401PTB 6 14 Screw Base/ Blind 56 CC-N18SB, CA14-3SB, CA14-9SB ACI-62201P 6 22 ¼ 3 ½” ID OpenEnds 89 CC-K2, CC-K28, CA22-3, CA22-9 ACI-62201PTB 6 22 Screw Base/ Blind 88 CC-K28SB, CA22-3SB, CA22-9SB ACI-62901P 6 28 ¾ 3 ½” ID OpenEnds 115 CC-N28, CA28-3, CA28-9 ACI-62901PTB 6 27 15⁄16 Screw Base/ Blind 111 CC-N28SB, CA28-3SB, CA28-9SB ACI-63301P 6 33 ¼ 3 ½” ID OpenEnds 133 CC-K38, CA33-3, CA33-9 ACI-63301PTB 6 33 Screw Base/ Blind 132 CC-K38SB, CA33-3SB, CA33-9SB Has NSN: 4330-01-439-2314 ACI-63301FP 6 33 3⁄8 2” ID OpenEnds 133 Faudi F. 1-842 (1.066.020) ACI-63801P 6 38 ¼ 3 ½” ID OpenEnds 153 CC-K38-1, CA38-3, CA38-9 ACI-63801PTB 6 38 Screw Base/ Blind 152 CC-K38SB-1, CA38-3SB, CA38-9SB ACI-64401P 6 43 ¼ 3 ½” ID OpenEnds 173 CC-N38, CA43-3 CA43-9 ACI-64401PTB 6 44 Screw Base/ Blind 176 CC-N38SB, CA43-3SB, CA43-9SB ACI-65601P 6 57 3 ½” ID OpenEnds 228 CC-N48, CA56-3, CA56-9 ACI-65601PTB 6 56 1⁄16 Screw Base/ Blind 224 CC-N48SB, CA56-3SB, CA56-9SB 1 Overall length does not include the 1” bolt for the ACI-6xx01PTB threaded base ACI’s. Note: Drain vessels equipped with the ACI Aquacon® Cartridges on a daily basis from an upstream drain to ensure upstream water is removed to prolong element life. CAUTION: DO NOT USE WITH PRE-MIXED FUELS CONTAINING ANTI-ICING ADDITIVES. TECHNICAL INFORMATION 1. Maximum exposure temperature is 160°F. 2. Cartridges are rated at 1/2 micron nominal efficiency. 3. AquaconCartridges can significantly reduce flow when loaded with water or dirt. Appropriate precautions should be taken in applications where fuel flow must be maintained or where surge conditions can occur. 4. Replace the cartridge if the differential pressure exceeds 25 psid. For service life information, please refer to Operating Procedure # 1839 or consult your company fuel handling procedures. 5. ACI burst strength exceeds 175 psid. If F/S vessel coalescer deckplate or manifold is not certified to 15 bar (220 psi) strength, a differential pressure limiting device, set from 25 - 30 psid, should be installed on the filter/separator vessel. 6. Typical water holding capacity for ACI-61401P: 900 ml.
RkJQdWJsaXNoZXIy NDE1MjE4