Petroleum Terminal Handling and Diesel Exhaust Fluid

Toptech Systems, Inc. What are the Benefits of FCM II? What is an FCM? In addition to providing all of the original functionality found in the previous generation units, FCM II introduces a variety of new features in a compact new package. Modular Construction FCM II is available in six varieties (featured below). This modular construction simplifies the process of FCM mapping to field devices by appropriating each FCM II model with just the right amount of I/O for its designated purpose. In addition, FCM IIs are both DIN rail and snaptrack mountable and require no wiring between units; 24 Vdc and serial communications are bussed. This substantially simplifies installation and wiring. The Flow Control Module (FCM) is an integral part of the MultiLoad system. The FCM contains its own microprocessor for digital valve control, meter pulse counts and factoring, additive injection, pump and meter permissives, andmore. The utilization of FCMs enables you to extend control beyond the confines of the expensive, heavy metal boxes that clutter today’s load racks. Now you can buy as much Ergonomic Packaging or as little as you need, and locate that control where it is Every FCM II occupies considerably less space than the needed. This design lowers equipment and installation previous generation FCM. This smaller footprint ranges costs significantly compared to traditional presets. from1/3 – 1/6 the size of the original unit. This allows for more I/O per in² and provides an opportunity to mount If you need to add a preset to the loading lane, you don’t several FCM IIs in a compact, explosion-proof enclosure. have to purchase, wire and install an entire traditional preset device. All you have to do is snap one or more Flow Control Modules into the FCM enclosure and configure accordingly. Compatibility FCM I and FCM II utilize the same protocol and can coexist on the same RS-485 bus. Furthermore, FCM IIs are backward compatible with previous generation FCMs allowing them to be used to replace older FCM units. In addition, FCM II is designed to work identically with all MultiLoad products. DOC-MKT-FCM0002_FCM_II_REV2 Toptech Systems, Inc. USA 280 Hunt Park Cove 6 Longwood, Florida 32750 Phone: +1 407-332-1774 6 Fax: +1 407-332-1802 www.toptech.com Toptech Systems, Inc. Europe Nieuwe Weg 1, 2070 Zwijndrecht (Antwerp), Belgium Phone: +32 (0)3 250 6060 6 Fax: +32 (0)3 250 6061 www.toptecheurope.com MultiLoad Architecture 87 93 Additive Tanks Product Tanks Pump Control Additive Control MultiLoad II RCU Bay I/O INPUT Ground Permissive Overflow Permissive Stow Switches All Meters Stop VCU/VRU Permissive Fire Detection, etc. OUTPUT Bay Permissive Indicator VCU/VRU Run Control Horn, etc. 93 87 Preset Control Preset Control FCM Cabinet Product Delivery Distributed I/O for Load Rack Control FCM II Toptech is Part of the Liquid Controls Group A Unit of IDEX Corporation With FCM II Comm and Power are Bussed Between Units One-third the Size of Previous FCM! Smaller Footprint Means More I/O Per Inch² FCM I FCM II 1/6 the size of FCM I 1/3 the size of FCM I 4 AC OUT 4 DC IN 1 RTD, 1 4-20mA IN 1 4-20 mA OUT 4 AC OUT 4 DC IN 6 AC IN 6 DC OUT 6 DC IN 1 2 3 4 5 6 AC OUT 6

RkJQdWJsaXNoZXIy NDE1MjE4