9 DIMENSIONAL DRAWINGS Drawings are not to scale. Dimensions are shown for estimating purposes only. Allow 6 inches (15.2 cm) below the vessel to safely remove the vessel to gain access to the cartridge. VF62 32-1/2” (81.92cm) 6” (15cm) Bolts 8-1/2” (22.2cm) 5-7/16” (13.8cm) 3” (7.6cm) 13/32” Dia (typ.) 1-1/2” NPT 1/8”NPT Vent x3 1/2” NPT Drain Optional CK-1488 Handles When assembled, the outside length becomes 10” (25.4cm) VF61 VF61E 20” (50.8cm) 6” (15cm) Bolts 8-1/2” (22.2cm) 5-7/16” (13.8cm) 3” (7.6cm) 13/32” Dia (typ.) 1-1/2” NPT 1/8”NPT Vent x3 1/2” NPT Drain Optional CK-1488 Handles When assembled, the outside diameter becomes 10” (25.4cm) (Optional: 10” with bolts) 20” (50.8cm) 6” (15cm) Clamp 7-1/2” (19cm) 5-7/16” (13.8cm) 3” (7.6cm) 13/32” Dia (typ.) 1-1/2” NPT 1/8”NPT Vent x3 1/2” NPT Drain VF-61E has a band clamp closure. Use in areas with limited space. FILTER CARTRIDGE SELECTION Product being filtered Application Cartridge P/N Type Micron Flow Rate (GPM) VF-61, VF-61E Jet Fuel & Avgas(1) Dirt & Free water ACO-512P3P Aquacon 0.3 5-50 ACO-51201P 0.5 5-50 OS-51288 Coalescer/Separator 0.5 Jet: 5-35, Avgas: 5-45 ALL Dirt FO-512PL1/2 Paper Filter 0.5 Fuels: 5-50 FO-512PL05 5 FO-512PL25 25 FOS-512PL25 Synthetic Filter 25 VF-62 Jet Fuel & Avgas(1) Dirt & Free water ACO-52401P Aquacon 0.5 10-100 ALL Dirt FO-524PL1/2 Paper Filter 0.5 2-100 FO-524PL05 5 FO-524PL25 25 (1) Always install a differential pressure gauge or other means of determining differential pressure. Please consult installation instructions and operating procedures that accompany products for more detailed information.
RkJQdWJsaXNoZXIy NDE1MjE4