12 Small Filter Housings VF-64, VF-65 Filter/Separator, Monitor Housing DESCRIPTION The versatile housings are designed to meet various requirements: a fuel filter/water separator and a micronics filter. Ideal for fuel dispensing applications The VF-64 and VF-65 filter assemblies are designed to meet the toughest hydrocarbon refueling conditions and designed for easy cartridge changeouts. The VF-64 and VF-65 assemblies can be used on mobile refuelers or installed in refueling cabinets. The unit can also be used for fuel dispensing pumps, as a primary fuel filter/ water separator or as bulk fuel handling, fuel transfer, and other higher flow applications. APPLICATION VF-64 & VF-65 assemblies are specifically designed to meet the filtration requirements of today’s high pressure common-rail diesel injection systems. The unit is used for fuel dispensing pumps or as a primary fuel filter/water separator on large diesel engine applications. VF-64 & VF-65 filter assembly were designed tomeet the toughest conditions and offer ease of filter change outs. The assembly features a “locking ring collar”, which attaches the filter housing to the aluminum die cast filter head with four bolts. The slotted “locking ring collar” allows maintenance personnel to hand loosen the four collar bolts, rotate, and lower the bowl assembly for filter changeouts. With a new filter cartridge installed, simply raise the bowl and rotate into position on the locking ring and hand tighten evenly (evenly torquing the 4 closure bolts to 100 lb-in is highly recommended). The closure hardware consists of stainless steel nuts, bolts, and washers with metal hand knobs for ease of maintenance. No wrenches or other special tools are required, allowing one person to easily change the filter cartridge (no V-band clamps are used). FEATURE: • Die-cast aluminum head • Steel filter bowl assembly • Powder coated components • Locking ring collar “no V-clamps” • 1.5” NPT inlet and outlet • Viton® seals for compatibility to various fuels • Field proven performance • Designed to withstand a max. pressure of 150 PSI (10 bar) and a maximum temperature of 240˚F (115˚C) • Differental Pressure Guage • Manual drain valve (½” NPT) • Manual vent valve • Sight glass (½” NPT) • Wide variety of accessories, filters and applications available CAUTION Do not useAquacon® absorbent cartridges (ACO Series) with premixed jet fuel containing anti-icing additives, or with gasoline/alcohol blends.
RkJQdWJsaXNoZXIy NDE1MjE4