15 Filter/Separator Configuration Vel-Max Series for liquid/ liquid separation uses a 2-stage coalescer separator cartridge combination to remove free and emulsified water from a liquid product stream. The first stage coalescing cartridge provides filtration as well as coalescing of free and emulsified water. The second stage separator is a hydrophobic barrier designed to repel the coalesced water droplets. The water droplets will fall and collect in the sump for removal through the manual drain. 6” OD x 3.5” ID Configuration Vel-Max Series with 6” OD x 3.5” ID cartridges can be used in two ways. To remove solid contaminants from a flow stream, use the vessel with a pleated media filter. When used withAquacon cartridges* the VelMax will remove solid contaminants and free water by absorption from a jet fuel or aviation gasoline flow stream. 6” or 6.25” OD x 2.625” ID Configuration Vel-Max Series for 6” or 6.25” OD x 2.625” ID cartridges can be used in several ways. To remove solid contaminants from a flow stream, use the vessel with a pleated media filter. When used withAquacon cartridges the Vel-Max will remove solids and free water by absorption from a fuel or industrial oil flow stream. Using Vel-Max with clay cartridges will remove surfactants, color and other impurities by adsorption from a fuel or industrial oil system. 6” or 6.25” OD x 2.625” ID Configuration Vel-Max Series can be adapted to use 2” diameter CDF® type monitor cartridges* for removing solid contaminants and free water by absorption from jet fuel or aviation gasoline flow streams. VELMAX FILTER VESSEL CONFIGURATIONS/APPLICATIONS *CAUTION: Do not useAquacon® or CDF® water absorbing monitor cartridges in pre-mixed jet fuel containing anti-icing additives (DiEGME, FIZZY® , Prist® , FSII)
RkJQdWJsaXNoZXIy NDE1MjE4