Dixon Valve & Coupling Cam & Groove Price List 1-800-355-1991 Cam and Groove Information " Andrews", "Boss-Lock" and "EZ Boss-Lock" Cam and Groove couplers and adapters are produced to interchange with all product produced toMil-C-27487F. No standard exists for the 1/2" and 8" fittings, and generally these sizes do not interchange with other manufacturers. Dust Caps and Dust Plugs are NOT to be used in Pressure Applications for safety and environmental reasons. Designed for use with Liquids, consult Dixon for specific recommendations. Recommendations based on the use of mating Dixon fittings at ambient temperature (70° F) with standard Buna-N Seal installed. For use at elevated temperature or other unusual operating conditions, consult the factory. Specifications: SPECIFICATIONS ON OUR CAM AND GROOVE Pressure Ratings: " ANDREWS" Operation of Cam and Groove 1. To make connection, simply slide the adapter into the coupler and with normal hand pressure, press the cam levers down. 2. Uncoupling is as quick and simple as coupling. Just lift the cam arms and remove the adapter. " BOSS-LOCK" The Cast-in lugs allow safety clips to be attached once the lugs are passed through slots in the special cam lever arms. These clips prevent the coupler from being unlocked until they are removed, providing a positive locking action. " Boss-Lock" Cam & Groove provides a unique patented safety feature. Dixon has developed the Pull Ring Safety Clip to simplify the locking action on "Boss-Lock" couplers. No more inserting clips or dangling lanyards, just a twist and it's locked, giving you a low profilepositive locking action. The Pull Ring Safety Clip will be phased into stock on all "Boss-Lock" couplers as inventory is replaced. Buy with Confidence " Boss-Lock" Investment Stainless Steel Cam Arms are Guaranteed!!! Should you ever break a "Boss-Lock" Investment Stainless Steel Cam Arm, simply return it to the nearest warehouse for a free replacement. Pull Ring Safety Clips 1/2" 150 " Andrews", "Boss-Lock" and "EZ Boss-Lock" Couplers and Adapters Maximum Working Pressure 5" & 6" 75 4" 100 Sizes PSI 3/4"-2" 250 2 1/2" 150 3" 125 4 If coupling is a reducing size, the coupler or adapter is the first size (i.e. 4030-C is 4 inch coupler to 3 inch hose shank.) 200 - A - AL - * Gasket Material Code Style Code Size of coupler or adapter and hose or pipe end; i.e. = 2 inch size. ANDREWS ORDERING SYSTEM 1. Precision machined to rigid tolerances. 2. Durable stainless steel cam arm pins will not rust or bind, for greater strength and safety. 3. Recess holds gasket firmly in place - assures proper placement. 4. Long shank design allows proper banding thus eliminating the major cause of hose damage. 2 1 3 2
RkJQdWJsaXNoZXIy NDE1MjE4