Model Hose Capacity of Reel Approx. Weight Standard Reel Dimensions*** Number feet lb. Roller inches m. kg. Assy mm. I.D. (in) 1/4" 3/8" 1/2" 3/4" I.D. (mm) 6 10 13 19 O.D. (in) 5/8" 3/4" 7/8" 1-9/32" NET SHIP A B C D E F G H X Y O.D. (mm) 16 19 22 33 617-25-26-15.5 B 2/75 2/75 2/50 – 93 128 R205 10.25 5 15.5 25 26.12 15.0 25.88 13.5 5.5 22 2/23 2/23 2/15 – 42 2 58.1 260 127 394 635 663 381 657 343 140 559 617-25-26-15.5 A 2/100 2/85 – – 120 155 R205 10.25 5 15.5 25 26.12 15.75 25.88 13.5 5.5 22 2/31 2/26 – – 54.4 70.3 260 127 394 635 663 400 657 343 140 559 † 618-30-31-15.5 A – – 2/100 2/50 130 165 R206 11.25 6 15.5 28.5 29.62 21.75 31.38 17 6.5 25.5 – – 2/31 2/15 59 74.8 286 152 394 724 752 552 797 432 165 648 SPRING REWIND DUAL HOSE REELS To handle dual 1/4" through 3/4" I.D. hose. • Rollformed channel frame for heavy duty applications. • Non sparking ratchet assembly. • Declutching arbor to prevent damage from reverse winding. • Standard inlets 90° balanced pressure swivel joints 1/2" female NPT threads. (1” inlet available). • Standard outlets 1/2" female NPT threads. (3/4”outlet available). • Pressures to 3000 psi (207 bar) • Temperatures from -60° F to +250° F (-51ºC to +121ºC). • Consult factory for other pressures & temps. • 4- way roller assembly. • Constant Tension is available – consult factory. • Reels for use with oxygen/acetylene. See Series N400 Hannay Reels Welding Catalog H-0408-W. Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com [email protected] For: • Hydraulics • Air/Water • Spray Painting Notes: 1. Specifications subject to change. 2. Reel models and capacities shown are for standard drag applications; for vertical lift applications consult factory. 3. Other sizes, from standard components, available on request. 4. Finish: refer to Page 4. 5. Be sure to check dimensions and weights prior to ordering. NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. *** x,y indicate mounting holes. See page 2 NPT threads, standard outlets are 1/2" female NPT threads. † Must specify if 1" joints and 3/4" outlet risers are required. Standard Configuration Shown 7 B C X A F G H Y D E S E R I E S For hydraulic tool circuit applications full flow swivels w/viton seals are recommended (add 2.25 to “F” dim in chart) Parts Drawing – ISO 8 SR (STD) Available Roller Positions VR (OPT) TR (OPT)
RkJQdWJsaXNoZXIy NDE1MjE4