Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com [email protected] 16 Model Hose Capacity of Reel Approx. Weight Reel Dimensions*** Number feet Crank Rewind 3 inches m. lb. mm. kg. I.D. (in) NET SHIP I.D. (mm) O.D. (in) A B E E F F X O.D. (mm) CRANK POWER CRANK POWER 2016-17-18 2/100 2/75 2/50 32 50* 13 8 18.5 19 21 20.75 11.5 2/31 2/23 2/15 15 23 330 203 470 483 533 527 292 2020-17-18 2/175 2/125 2/75 34 50* 17 12 18.5 19 25 24.75 15.5 2/53 2/38 2/23 15 23 432 305 470 483 635 629 394 2026-17-18 2/275 2/200 2/125 36 50* 23 18 18.5 19 31 30.75 21.5 2/84 2/61 2/38 16 23 584 457 470 483 787 781 546 2030-17-18 2/350 2/250 2/175 37 50* 27 22 18.5 19 35 34.75 25.5 2/107 2/76 2/53 17 23 686 559 470 483 889 883 648 2036-17-18 2/425 2/300 2/225 39 50 33 28 18.5 19 41 40.75 31.5 2/130 2/91 2.69 18 23 838 711 470 483 1041 1035 800 C 6 152 G 18.12 460 H 9.88 251 Y 10 254 D 14.5 368 E B X A F Notes: 1. Specifications subject to change. 2. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters. 3. Weights shown in chart are for crank rewind models. ADD these amounts for power rewind models: Net (lbs.) Ship (lbs.) Net (kg.) Ship (kg.) Electric 18 18 8.2 8.2 Air 15 15 6.8 6.8 4. Dimension “F" is the overall length of standard model reels. MX chain drive crank models, reels require 2" clearance to remove crank handle. 5. When ordering, prefix model number with: A = Air Rewind E = Electric Rewind MX = Chain Drive Crank ( Air rewind reels are supplied with control valve and hose; 12 v and 24v DC rewind reels are supplied with switch and solenoid; 115 v AC rewind reels are not supplied with switch but can be ordered separately.) 6. Finish: refer to Page 4. 7. Be sure to check dimensions and weights prior to ordering. 8. Some roller options may prohibit the use of our molded chain guard. NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. * When shipped as a parcel package (via Fed-Ex or UPS Ground). *** x,y indicate mounting holes. See page 2 MANUAL OR POWER REWIND REELS To handle dual 1/4" through 1/2" I.D. hose. • Two swivel joint inlets and two outlet risers to handle two equal lengths of hose. • Chain-drive crank rewind or chain and sprocket rewind powered by an electric, or compressed air motor. • MX Crank rewind reels pinion brake as standard. • Power rewind reels are not supplied with a brake. • Standard inlets 90° ball bearing swivel joints 1/2" female NPT threads. • Standard outlets 1/2" female NPT threads. • Pressures to 3000 psi (207 bar). • Temperatures from +20° F to +400° F (-7° C to +204° C). • Consult factory for other pressures & temps. • Reels for use with oxygen/acetylene. See Series 2400 Hannay Reels Welding Catalog H0408-W. S E R I E S For: • Hydraulics • Air/Water • Spray Painting Standard Configuration Shown For Power Rewind See Note 5 Power Rewind Shown Parts Drawing – ISO 112 1/4" 3/8" 1/2" Optional External Mounting Brackets part no. 9906.0025. Add 2-1/2" to the X dimensions shown in the chart.
RkJQdWJsaXNoZXIy NDE1MjE4