MANUAL REWIND REELS To handle 3/4" or 1" I.D. hose. • Economical manual rewind reels for long lengths of hose. • Choose disc rewind or removable direct crank rewind. • Supplied with spring-actuated pin lock. • Standard inlet 90° ball bearing swivel joint 1" female NPT threads. • Standard outlet 1" female NPT thread. • Optional bronze or aluminum swivel joint and stainless steel hub assembly and riser, are available • Optional Rollers may be purchased. • Pressures to 1000 psi (69 bar) • Temperatures from -60° F to +250° F (-51° C to +121° C). • Consult factory for other pressures & temps. Standard with Crank Handle Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com [email protected] Notes: 1. Specifications subject to change. 2. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters. 3. Power rewind NOT available on these models. 4. Dimension “F” is the overall length of standard model reels. Crank rewind models, 3–1/2" clearance required to remove crank. 5. Subtract 5" from ‘F’ dimension for disc rewind models. 6. Finish: Call factory for offshore/marine finish, available at extra cost. Refer to Page 4. 7. Be sure to check dimensions and weights prior to ordering. NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. *** x,y indicate mounting holes. See page 2 For: • Fuel Dispensing ( Consult Factory) • Spray Operations • Fire Protection 18 Model Hose Capacity of Reel Approx. Weight Reel Dimensions*** Number feet Crank Rewind inches m. lb. mm. kg. Round Hose Collapsible Hose I.D. (in) 3/4" 1" 1" I.D. (mm) 19 25 25 O.D. (in) 1-9/32" 1-9/16" 1/2" x1-3/4" NET SHIP A B F X O.D. (mm) 33 40 13 x 44 3016-25-26 100 50 200 85 120 13 7.5 23.75 7.75 30 15 61 39 54 330 191 603 197 3020-25-26 150 100 300 94 129 17 11.5 27.75 9 46 30 91 43 59 432 292 705 229 3024-25-26 250 150 400 103 138 21 15.5 31.75 13 76 46 122 47 63 533 394 806 330 3028-25-26 300 200 550 113 155 25.5 20 36.25 17.5 91 61 168 51 70 648 508 921 445 C 10.5 267 X A F B E 24.75 629 G 27.88 708 H 15.5 394 Y 21.75 356 D 25.5 648 S E R I E S Parts Drawing – ISO 113
RkJQdWJsaXNoZXIy NDE1MjE4