Model Hose Capacity of Reel Approx. Weight Reel Dimensions*** Number feet Crank Rewind inches m. lb. mm. kg. Round Hose Collapsible Hose I.D. (in) 1" 1-1/2" 1-1/2" 1-3/4" I.D. (mm) 25 38 38 44 O.D. (in) 1-9/16" 2-1/16" 3/4"x3" 7/8"x3-1/4" NET SHIP A B E F G H X O.D. (mm) 40 52 19 x 76 22 x 83 3516-25-26 50 – 50 50 95 130 13 7.5 24.75 26 27.88 15.5 7.75 15 – 15 15 43 59 330 191 629 660 708 394 197 3520-25-26 100 50 100 75 104 139 17 11.5 24.75 30 27.88 15.5 9 30 15 30 23 47 63 432 292 629 762 708 394 229 3524-25-26 150 75 150 100 113 157 21 15.5 24.75 34 27.88 15.5 13 46 23 46 30 51 71 533 394 629 864 708 394 330 3528-25-26 200 100 200 150 123 173 25.5 20 24.75 38.5 27.88 15.5 17.5 61 30 61 46 56 78 648 508 629 978 708 394 445 3524-30-31 200 100 250 150 124 174 21 15.5 28.75 34 29.88 15.5 13 61 30 76 46 56 79 533 394 730 864 759 394 330 3528-30-31 250 150 300 250 134 184 25.5 20 28.75 38.5 29.88 15.5 17.5 76 46 91 76 61 83 648 508 730 978 759 394 445 3534-30-31 350 200 450 350 147 197 31.5 26 28.75 44.5 29.88 15.5 23.5 107 61 137 107 67 89 800 660 730 1130 759 394 597 3530-33-34 400 250 450 350 138 188 27.5 22 31.75 40.5 32.38 16.5 19.5 122 76 137 107 63 85 699 559 806 1029 822 419 495 Y 21.75 356 E B X A F G H D 25.5 648 C 10.5 267 MANUAL REWIND REELS To handle 1" through 1–3/4" I.D. hose. • Economical manual rewind reels for long lengths of hose. • Choose disc rewind or removable direct crank rewind. • Supplied with spring-actuated pin lock. • Standard inlet 90° swivel joint 1-1/2" female NPT threads and 2" victaulic groove. • Standard outlet flanged riser with 1-1/2" female NPT threads. • Optional bronze or aluminum swivel joint and stainless steel hub assembly and riser, are available • Optional Rollers may be purchased. • Pressures to 600 psi (41 bar) • Temperatures from -40° F to +175° F (-40° C to +79° C). • Consult factory for other pressures & temps. Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com [email protected] For: • Fuel Dispensing ( Consult Factory) • Bulk Transfer • Fire Protection Notes: 1. Specifications subject to change. 2. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters. 3. Power rewind NOT available on these models. 4. Dimension “F” is the overall length of standard model reels. Crank rewind models, 3–1/2" clearance required to remove crank. 5. Subtract 5" from ‘F’ dimension for disc rewind models. 6. Finish: Call factory for offshore/marine finish, available at extra cost. Refer to Page 4. 7. Be sure to check dimensions and weights prior to ordering. NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. *** x,y indicate mounting holes. See page 2 Standard with Crank Handle 19 S E R I E S Parts Drawing – ISO 111
RkJQdWJsaXNoZXIy NDE1MjE4