Standard Configuration Shown Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com [email protected] Notes: 1. Specifications subject to change. 2. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters. 3. Dimensions shown up to and including 30-31 disc size reflect pressed frames. All others are rollformed channel frames. 4. Weights shown in chart are for crank rewind models. ADD these amounts for power rewind models: Net (lbs.) Ship (lbs.) Net (kg.) Ship (kg.) Electric 40 40 18.1 18.1 Hydraulic 20 20 9.1 9.1 Air 20 20 9.1 9.1 5. When ordering, prefix model number with: A = Air Rewind EP = Electric Rewind MX = Chain Drive Crank HD = Hydraulic Rewind ( Air rewind reels are supplied with control valve and hose; 12v and 24v DC rewind reels are supplied with switch and solenoid; 115v AC rewind reels are not supplied with switch but can be ordered separately; hydraulic rewind reels are not supplied with control valve.) 6. Finish: refer to Page 4. 7. Be sure to check dimensions and weights prior to ordering. For: • Hydraulics • Dual Agents 24 Model Hose Capacity of Reel Approx. Weight Reel Dimensions*** Number feet Crank Rewind 4 inches m. lb. mm. kg. I.D. (in) 3/4" 1" I.D. (mm) 19 25 O.D. (in) 1-9/32" 1-9/16" NET SHIP A B D E F F G H X Y O.D. (mm) 33 40 CRANK POWER 7024-19-21 2/60 2/25 100 142 21 15.5 20.5 21.88 29.75 32.12 21.5 12.12 13 16.75 2/18 2/8 45 64 533 394 521 556 756 816 546 308 330 425 7026-23-24 2/90 2/50 105 147 23 17.5 20.5 23 31.75 34.12 23.5 12.12 15 16.75 2/27 2/15 48 67 584 445 521 584 806 867 597 308 381 425 7016-25-26 2/40 2/30 95 145 13 7.5 25.5 24.75 21.75 24.12 27.88 15.5 7.75 21.75 2/12 2/9 43 66 330 191 648 629 552 613 708 394 197 552 7032-25-26 2/175 2/100 129 179 29.5 24 25.5 24.75 38.25 40.62 27.88 15.5 21.5 21.75 2/53 2/31 59 81 749 610 648 629 972 1032 708 394 546 552 † 7032-30-31 2/300 2/150 137 187 29.5 24 25.5 28.75 38.25 40.62 29.88 15.5 21.5 21.75 2/91 2/46 62 85 749 610 648 730 972 1032 759 394 546 552 † 7024-33-34 2/225 2/115 120 170 20.5 15.5 31.5 31.75 29.75 32.12 33.62 17.75 13 27.75 2/69 2/35 54 77 521 394 800 806 756 816 854 451 330 705 † 7032-33-34 2/350 2/200 137 187 29 24 31.5 31.75 38.25 40.62 33.62 17.75 21.5 27.75 2/107 2/61 62 85 737 610 800 806 972 1032 854 451 546 705 C 10.5 267 E Y D H G B X A F NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. *** x,y indicate mounting holes. See page 2 † Some applications require a clutch/reduction unit. S E R I E S For Power Rewind See Note 5 Power Rewind Shown MANUAL OR POWER REWIND REELS To handle dual 3/4" or 1" I.D. hose. • Two swivel joint inlets and two outlet risers to handle two equal lengths of hose. • Choose gear-driven crank rewind or chain & sprocket drive powered by an electric, hydraulic or compressed air motor. An auxiliary rewind is standard. • Crank rewind and power rewind reels, pinion brake standard. • Standard inlets 90° ball bearing swivel joints 1" female NPT threads. • Standard outlets 1" female NPT threads. • Standard inlet, outlet riser and hub assembly are steel. Optional bronze or aluminum swivel joint and stainless steel hub assembly and riser, are available. • Pressures to 1000 psi (69 bar). • Temperatures from -60° F to +250° F (-51° C to +121° C). • Consult factory for other pressures & temps. Parts Drawing – ISO 72
RkJQdWJsaXNoZXIy NDE1MjE4