MANUAL OR POWER REWIND REELS To handle single 1" through 1-1/2" I.D. hose. • Heavy-duty reel designed for longer lengths. • Choose gear-driven crank rewind or chain and sprocket drive powered by an electric, hydraulic or compressed air motor. • Crank rewind reels supplied with pinion brake and power rewind reels with a comet brake. • Standard inlet 90° ball bearing swivel joint 1-1/2" female NPT threads and 2" victaulic groove. • Standard outlet flanged riser 1-1/2" female NPT threads. • Standard inlet, outlet riser and hub assembly are steel. Optional bronze or aluminum swivel joint and stainless steel hub assembly and riser, are available. • Rollers may be purchased as accessory items. • Operate at pressures to 600 psi (41 bar). • Temperatures from -40° F to +175° F (-40° C to +79° C). • Consult factory for other pressures & temps. Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com [email protected] For: • Fuel Dispensing ( Consult Factory) • Bulk Transfer • Suction/Discharge ( Consult Factory) Notes: 1 Specifications subject to change. 2. Upon request, reels can be supplied wi h drum leng hs other han shown and with disc sizes in o her diameters. 3. Dimensions shown for reels up to and including 30-31 disc size reflect pressed frames. All others are rollformed channel frames. 4. Weights shown in chart are for crank rewind models. ADD these amounts for power rewind models: Net (lbs.) Ship (lbs.) Net (kg.) Ship (kg.) Electric 40 40 18.1 18.1 Hydraulic 20 20 9.1 9.1 Air 20 20 9.1 9.1 5. When ordering power rewind models, prefix model number with: A = Air Rewind EP = Electric Rewind (1/2 hp) HD = Hydraulic Rewind ( Air rewind reels are supplied with control valve and hose; 12v and 24v DC rewind reels are supplied with switch and solenoid; 115v AC rewind reels are not supplied wi h switch but can be ordered separately; hydraulic rewind reels are not supplied wi h control valve.) 6. Finish: refer to Page 4. 7. Be sure to check dimensions and weights prior to ordering. NOTICE: A Flexible Connector must be used between he inlet pipe and the inlet swivel joint. *** x,y indicate mounting holes. See page 2 † Some applications require a clutch/reduction unit. Standard Configuration Shown Optional Auxilary Rewind (Ring and pinion shaft rewind unit with removable crank handle) 25 Model Hose Capacity of Reel Approx. Weight Reel Dimensions*** Number feet Crank Rewind 4 inches m. lb. mm. kg. I.D. (in) 1" 1-1/4" 1-1/2" I.D. (mm) 25 32 38 O.D. (in) 1-9/16" 1-13/16" 2-1/16" NET SHIP A B D E F F G H X Y O.D. (mm) 40 46 52 CRANK POWER 7528-19-21 85 70 50 104 146 25.5 20 20.5 18.75 32 33 21.5 12.12 17.5 16.75 26 21 15 47 66 648 508 521 476 813 838 546 308 445 425 7538-23-24 200 190 100 130 172 35 29.5 20.5 22.75 41.5 42.5 23.5 12.12 27 16.75 61 58 30 59 78 889 749 521 578 1054 1080 597 308 686 425 7520-25-26 115 75 50 106 148 17 11.5 25.5 24.75 23.5 24.5 27.88 15.5 9 21.75 35 23 15 48 67 432 292 648 629 597 622 708 394 229 552 7528-25-26 200 135 100 123 165 25.5 20 25.5 24.75 32 33 27.88 15.5 17.5 21.75 61 41 30 56 75 648 508 648 629 813 838 708 394 445 552 7522-30-31 190 160 100 118 168 19 13.5 25.5 28.75 25.5 26.5 29.88 15.5 11 21.75 58 49 30 54 76 483 343 648 730 648 673 759 394 279 552 † 7528-30-31 285 260 160 131 181 25.5 20 25.5 28.75 32 33 29.88 15.5 17.5 21.75 87 79 49 59 82 648 508 648 730 813 838 759 394 445 552 † 7526-33-34 335 200 200 133 183 22.5 17.5 31.5 31.75 29.25 30.25 33.62 17.75 15 27.75 102 61 61 60 83 572 445 800 806 743 768 854 451 381 705 C 10.5 267 E Y D H G X A F B S E R I E S Power Rewind Shown For Power Rewind See Note 5 Parts Drawing – ISO 18
RkJQdWJsaXNoZXIy NDE1MjE4