2 Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com [email protected] Series 1-1/2" EPJ Option Shown MANUAL OR POWER REWIND REELS To handle single 1" through 1-1/2" I.D. hose. • A strong, heavy-duty reel. • Gear-driven crank rewind or chain and sprocket drive powered by an electric, hydraulic or compressed air motor. • Optional auxiliary crank rewind for power rewind reels. • Choose EP or EPJ option. • Comet brake, standard on power rewind without auxiliary crank. • 90 ° ball bearing swivel joint with 1-1/2" female NPT threads and 2" victaulic groove. • Flanged riser with 1-1/2" female NPT threads. • Other sizes and/or threads can be furnished and must be specified. • Inlet, outlet riser, hub assembly are steel. • Stainless steel, aluminum, at extra cost. • Rollers (and their mounting brackets) are available. Must specify roller position. • Mounting brackets are necessary. • Pressures to 600 psi (41 bar) • Temperatures from -60°F to +175° F (-51° C to +79° C). • Consult factory for other pressures & temps. S E R I E S Note to Designers and Engineers: The reels shown in this catalog are the standard of the industry. These models reflect various installation and performance requirements. The high quality of our standard steel construction is only the beginning. Hannay Reels offers any size configuration to fit a defined space, and we construct many models of reels of aluminum or stainless steel. Specifically, we use 5000 and 6000 Paint Notice To meet the requirements and performance of vehicle and OEM apparatus paints we recommend our reels be painted with the same or equal paint as used on the specific apparatus the reel is being mounted on. Hannay Reels will supply any model or custom reel or part with an automotive primer or rust preventative oil finish upon request, allowing application of final coating at your facility. Or at additional cost Hannay can prime / pre-paint all material before final assembly. In today’s regulatory environment this would be the most cost-effective way to meet your finishing standards. Consult factory for other optional finishes Standard finish is oven cured enamel. High performance finishes for demanding and corrosive environments are available at an additional cost. Consult factory for specific requirements. Series aluminum and 304 stainless steel in the manufacture of frames, discs, drums and internals as well as other structural components. This type of construction eliminates the need for maintenance repainting and part replacement due to rust or corrosion. Please consult factory on any fuel handling questions. For the many accessories and components available on our standard reel models such as roller guides, switches, brakes and locks, etc., please refer to our Ordering & Accessory Guide H-0415-OA.
RkJQdWJsaXNoZXIy NDE1MjE4