“ A” Frame Loader M-32-F The “A” Frame is one of the more popular loading arm configurations. It provides good flexibility, long reach, and is convenient and easy to use. It adjusts for any changes in the elevation or tilting of the vehicle during loading or unloading. The arm stores neatly in the upright, near-vertical position, allowing it to swing around easily for loading from either side of the island. The “A” Frame’s compact storage envelope also allows these arms to be installed relatively close together, often on risers that are approximately the same height as the vehicle connection. They can also be mounted next to one another on staggered risers to achieve arm crossover for simultaneous loading of multiple compartment trucks. Commonly used for tank-truck bottom loading, “A” Frame arms also can be used in top-loading and unloading installations. They are generally equipped with a dry-disconnect coupling, union, or other tight-fill fitting. 300- pound. inlet flange and seamless piping are suitable for handling liquefied petroleum gases, including propane and butane. Benefits • Easily stored away from vehicles • For multiple product applications, it can be mounted close to another arm • Can be stored safely to ensure safe clearance of vehicles • Crossover easily can be achieved Features • Low riser mounting height • Available in 2", 3" and 4" • Available in steel, stainless steel, aluminum, and specialty alloys • Choice of flanged, threaded or all-welded construction • LPG service arms (LPG-32-F): all-welded construction • Welded assemblies in steel and stainless steel with 300 lb. flanges 8 B O T T O M L O A D I N G Size A D G Z R Y in. mm in. mm in mm in mm in mm in mm in mm 2" 51 8-5/8 219 60 1524 60 1524 90 2286 17 432 8-1/8 206 3" 76 10-1/2 267 60 1524 60 1524 90 2286 18-1/2 470 10-3/4 273 4" 102 11-3/4 298 60 1524 60 1524 90 2286 20 508 12-3/4 324 * Custom dimensions also available. Dimensions* D G A Z Y R Overhead View IMPORTANT: OPW products should be used in compliance with applicable federal, state, provincial, and local laws and regulations. Product selection should be based on physical specifications and limitations and compatibility with the environment and materials to be handled. OPW MAKES NOWARRANTY OF FITNESS FOR A PARTICULAR USE. All illustrations and specifications in this literature are based on the latest product information available at the time of publication. OPW reserves the right to make changes at any time in prices, materials, specifications and models and to discontinue models without notice or obligation.
RkJQdWJsaXNoZXIy NDE1MjE4