Single Arm Fixed Reach E-32-F, J-32-F Primarily used to load and unload railcars through open domes in installations where the cars can be spotted accurately. The single arm configuration also can be used for tank-truck applications. Some allowance for mis-spotting is possible with the single arm and increases as the diameter of the hatch opening increases. This simple arm incorporates only three swivel planes of rotation and is designed for use in top loading installations where the vehicle is located at a fixed distance from the riser pipe. The two swivel planes at the inlet permit both up-and-down and side-to-side movement of the assembly. The third swivel plane allows the drop pipe to remain vertical. Valves can be located inboard or outboard to facilitate loading. With a valve located outboard, drippage of viscous products after loading can be minimized. The single-arm loader is adaptable to tightfill or closed-system loading when equipped with additional swivel planes of rotation and/or drop hose, along with required outboard coupling, union or fitting. Benefits • Adaptable to tight-fill or closed-system loading when equipped with additional swivel planes of rotation and/or drop hose, along with required outboard coupling, union or fitting • Rail or truck applications • Smooth, easy operation Features • Available in 2", 3" and 4" • Available in carbon steel, stainless steel, aluminum and special alloys • Choice of flanged, threaded or all-welded construction 14 T O P L O A D I N G Size A D G R Y in. mm in. mm in mm in mm in mm in mm 2" 51 8-5/8 219 120 3048 48 1219 17 432 8-1/8 206 3" 76 10-1/2 267 120 3048 48 1219 18-1/2 470 10-3/4 273 4" 102 11-3/4 298 120 3048 48 1219 20 508 12-3/4 324 * Custom dimensions also available. Dimensions* A D Y R Overhead View J-32-F ( without valve) E-32-F ( with valve) G IMPORTANT: OPW products should be used in compliance with applicable federal, state, provincial, and local laws and regulations. Product selection should be based on physical specifications and limitations and compatibility with the environment and materials to be handled. OPW MAKES NOWARRANTY OF FITNESS FOR A PARTICULAR USE. All illustrations and specifications in this literature are based on the latest product information available at the time of publication. OPW reserves the right to make changes at any time in prices, materials, specifications and models and to discontinue models without notice or obligation.
RkJQdWJsaXNoZXIy NDE1MjE4