Ordering Please refer to chart above for LC model number coding system Model Description Flow rates: Maximum Normal Minimum Operating temperatures: Maximum Normal Minimum Maximum non-shock working pressure Maximum viscosity @ ( Temp/ºF or ºC) Specific gravity Construction class: (1, 2, etc. ) Direction of flow: ❏L to R ❏R to L Seal material: ❏Standard Buna/Viton ❏All Viton ❏All PTFE Read out: ❏Gallons ❏Liters ❏Pounds ❏Other __________ Strainer basket: ❏40 M ❏80 M ❏100 M ❏200 M ❏Other ____________________ Flange size: ___________________________________ Flange type: ❏RF or FF ANSI ❏DIN ❏Other ______ Options: ______________________________________ 19 Ordering information Mounting arrangements LC meters may be mounted in a variety of configurations, as shown below. Do not position the meter on its side, i.e., with cover plate face down or up. Note: regardless of meter mounting configurations, accessories such as the air/vapor eliminator must always be mounted in a vertical orientation to permit proper operation of the float-actuated apparatus. M/MA-7-C C=Meter with counter, strainer and air eliminator M/MA-7-I I =Meter with counter, preset counter and preset valve M/MA-7-K K=Meter with counter, preset counter, preset valve, strainer and air eliminator Standard accessory configurations A, C, I, K M/MA-7-A A=Meter with counter Model number coding description MSA-7-A-10 Meter Type M = meter Case Material Blank = other than steel S = steel case Accessory Configuration A, C, I, K ( see chart below) Construction/ Application Class 1, 2, 3, 10, etc. ( see table on p. 9) Working Pressure Blank = 150 psi AA = 275 psi A = 350 psi B = 720 psi C = 1440 psi Meter Size 4 = 40 gpm 15 = 200 gpm 60 = 600 gpm 5 = 60 gpm 25 = 300 gpm 75 = 700 gpm 7 = 100 gpm 30 = 350 gpm 80 = 800 gpm 10 = 150 gpm 40 = 450 gpm 120 = 1000 gpm Optional Accessories: Printer, Strainer Optional Accessories: Printer Optional Accessories: Printer, Strainer Optional Accessories: Printer M/MA-7-ALI A=Meter with electronic register Optional Accessories: Printer, Strainer, Valve, ETVC M/MA-7-CLI A=Meter with electronic register, strainer, and air eliminator Optional Accessories: Printer, valve, ETVC
RkJQdWJsaXNoZXIy NDE1MjE4