EATONAerospace Group TF100-119C June 2013 3 Option Letter Description A Adds 40-mesh screen and retaining ring (44373-40) B Adds 60-mesh screen and retaining ring (44373-60) C Adds 100-mesh screen and retaining ring (44373-100) D Adds long male half adapter to mate with Model 60427 nozzle, less regulator and related accessories (44700) E Adds male half adapter to mate military D-1/D-2 nozzles (44663) F Adds male half adapter to provide 2-inch BSPP male thread to mate overwing nozzle (44746) G Adds male half adapter to provide 1½-inch BSPP male thread to mate overwing nozzle (47024) J Adds short male half adapter to mate Model 60427 nozzle with regulator and related accessories (44185) R Adds short male half adapter to mate Model 61428 nozzle with regulator and related accessories (44697) S Adds long male half adapter to mate Model 61428 nozzle without regulator and related accessories (44701) T Adds male half adapter to provide 1½-inch NPT male thread to mate overwing nozzle or CCR nozzle (44698) U Adds male half adapter to provide 2-inch NPT male thread to mate overwing nozzle (47065) Notes: 1. Options A, B, and C fit into the male half adapters only (Options D, E, F, J, R, S and T) 2. Options D, E, F, G, J, R, S, T, or U must be ordered with one of the six basic units above to obtain a completed unit Note: It is important to consider whether a hose end regulator is used or not when choosing the dry break disconnect. The male half option is different when a regulator is used. If the incorrect male half option is specified, either the nozzle opening handle will interfere with the dry break disconnect (short adapters, Options J or S, used where no regulator is present); or the nozzle assembly will be longer than necessary (long adapters, Options D or R, used with a regulator). NSN Information Several Model 61154 Dry Break Quick Disconnect configurations have NSN numbers issued, as follows: NSN Eaton Model Description 4730-01-366-7215 61154AEL Dry Break QD, 40-mesh screen, 3-inch NPT inlet, outlet to mate D-1/D-2 nozzle 4730-01-366-9406 61154AEP Dry Break QD, 40-mesh screen, 2-inch NPT inlet, outlet to mate D-1/D-2 nozzle 4730-01-306-6328 61154EP Dry Break QD, 2-inch NPT inlet, outlet to mate D-1/D-2 nozzle 4730-01-353-8497 61154BEH Dry Break QD, 60-mesh screen, 2½-inch NPT inlet, outlet to mate D-1/D-2 nozzle Superseding Information Model 61154Dry Break QD is designed to replace older Model 60672-1, used on the D-1 and Model 60427 nozzles, and Model 44363, used on older Model 61428 nozzles. The male and female halves of Model 61154 are not interchangeable with either the 60672-1 or 44363 model’s male and female halves. The entire dry break disconnect must be replaced. Illustrated Options Model 61154 dry break disconnect is available in six basic female half units (see descriptions shown at the right) to which the options listed below may be added to obtain a complete unit. Ordering Data Model Description 61154H Female half with 2½-inch NPT inlet 61154L Female half with 3-inch NPT inlet 61154K Female half with 2½-inch BSPP inlet 61154M Female half with 3-inch BSPP inlet
RkJQdWJsaXNoZXIy NDE1MjE4