BULLETIN The BLENDTECHMARK I Injection Manifold provides users with a complete stainless steel fluid metering block for injecting a wide variety of fuel additives or dyes. MiniBLOCK serves as a ”slave device” to a user-supplied “master controller” such as the MARK V or “TAS” system. The product is accurate, reliable and compatible with a wide range of chemicals. The oval gear design offers high accuracy and low pressure drop. Sensors are either UL / ULc or ATEX listed and are approved for use in hazardous area locations. Document Number: MKI_77x8_001 BLENDTECH Product Bulletin MARK I 77x8 Injection Manifold Product Description System Description The BLENDTECH MARK I 77x8 Injection Manifold is a completely integrated, self-contained additive injector. The process valves, solenoid valve, process fittings, strainer and flow meter are integrated onto a precision machined block, available in either 304 stainless steel or high strength aluminium ( special order), providing a high-tech drop-in injection solution. This product is designed to be a slave to an intelligent additive injection controller, such as the BLENDTECH MARK V, PLC, TAS controller or electronic load controller capable of additive injection. Features The Total Solution Company BLENDTECH, A Division of PT Industrial Electric Co. • 216 Rivermede Road, Units 1 and 2 • Concord, Ontario, L4K 3M6, Canada p: 905.669.5712 • f: 905.669.5193 • www.blendtech.com • [email protected] Key Features • Compact Integrated additive injection solution virtually eliminating all possible leak points. • Available in either stainless steel or high strength aluminium ( special order). • Slave injector compatible with all BLENDTECH FLEx iO hardware and most additive injection control hardware, including TAS controllers, PLC and Load controllers. • Industry standard components. • Low Pressure Drop • Either hall effect or reed switch sensors options available. • Unique mechanical arrangement ensuring very high accuracy during control. • Chemraz and Teflon elastomers for excellent chemical resistance • UL / ULc or ATEX Approvals available • Supports multiple additive configuration. • AC or DC options available. • Quick connect calibration port. Model MKI 7718 • For low dosage applications, such as dye, marker and ethyl mercaptan. • Flow rate 0.03 to 0.30 GPM (0.12 to 1.20 lpm) at 1 cSt. • Maximum operating pressure 300 psig • Maximum differential pressure 145 psig • High pressure solenoid available • Accuracy 0.25 to 0.50 % of flow. • Nominal Meter Kf 6000 ppg (1585 ppl) Model MKI 7738 • For most typical gasoline and diesel additives. • Flow rate 0.3 to 3.0 GPM (1.2 to 12.0 lpm) at 1 cSt. • Maximum operating pressure 300 psig • Maximum differential pressure 145 psig • Accuracy 0.25 to 0.50 % of flow. • Nominal Meter Kf 2600 ppg (687 ppl) VANCOUVER I NANAIMO I EDMONTON I CALGARY I SASKATOON I REGINA I WINNIPEG I MISSISSAUGA I OTTAWA I MONTREAL I MONCTON I DARMOUTH I ST. JOHN’S 604.472.7170 250.753.2515 780.466.2171 403.735.1103 306.665.0223 306.721.1030 204.633.8569 905.670.8863 613.224.0685 514.355.2366 506.861.1010 902.468.7342 709.747.0015
RkJQdWJsaXNoZXIy NDE1MjE4