Composition Pipe Filament-wound fiberglass-reinforced epoxy resin pipe with integral resin-rich reinforced liner of 20 mil (0.5 mm) nominal thickness. Filament-wound fittings Furnished with 50 mil (1.3 mm) reinforced liner using same materials as the pipe. Tees Flanges* 90 ° and 45° elbows Nipples and couplings Crosses Tapered body reducers 45 ° laterals Saddles* * No liner. Molded fittings Tees 90 ° and 45° elbows Reducing flanges Plugs and end-caps Reducer bushings Blind flanges Flanged fittings 2-12 inch filament-wound flanged fittings match ANSI B16.1 and ANSI B16.5 bolt hole pattern and face-to-face dimensions for 150 lb flanges. 1-16 inch flanges match ANSI B16.1 and ANSI B16.5 bolt hole pattern for 150 lb flanges. Other flange drilling patterns such as DIN, ISO, JIS, ANSI B16.5 300 lb. etc., available on special request. Thermosetting adhesives PSX™•34 two-part epoxy adhesive for general industrial service. RP6B two-part epoxy adhesive for service in compliance with U.S. Federal Regulations 21CFR175.105 and 21CFR177.2280. Pipe lengths Joining systems Quick-Lock® straight/taper adhesive-bonded joint. 2”-6” pipe outside diameter is within tolerance for reliable bonding without shaving. Integral pipe stop in socket featured for predictable, precise laying lengths. Flanges and flanged fittings. Bondstrand Series 2000 filament-wound fittings, pipe and adhesive provide a continuous liner throughout the piping system. 2 Nominal Random Pipe Size Lengths1 ( in) ( mm) ( ft) ( m) 1-11⁄2 25-40 10 3 2-6 50-150 20 or 40 6 or 12 8 200 20 or 30 6 or 9 10-16 250-400 20 6 1) Other lengths and exact lengths available on special request.
RkJQdWJsaXNoZXIy NDE1MjE4