Series 2000MP Fiberglass Pipe and Fittings certified to Specification MIL-P-28584B Chilled water Condensate return Domestic hot water Heating water Pumped hot water Uses and applications MIL-P-28584B for pipe and fittings conveying water at pressures to 125 psig and temperatures to 250°F. Listings Excellent corrosion resistance over a wide temperature range. Weighs 1⁄6 th as much as steel. Does not require thrust blocks at ambient temperatures when properly installed. Smooth inner liner produces extremely low frictional loss (Hazen-Williams C = 150) for greater discharge and reduced pumping costs. Low thermal conductivity (1⁄100 th of steel) minimizes heat losses. Performance Pipe Filament-wound fiberglass reinforced epoxy resin pipe with nominal 0.020-inch (0.5 mm) resin-rich reinforced liner. Continuous operating temperatures to 250°F (121°C). Filament-wound fittings Furnished with reinforced liner using same materials as pipe. Tees 45 ° elbows 90 ° elbows Couplings Flanges Nipples Saddles Tapered body reducers Flanged fittings Flanges match bolt-hole pattern for ANSI B16.5 150 lb flanges, ANSI B16.1 for 125 lb cast iron flanges and ISO Standard 2229. Thermosetting adhesives PSX™•34 two-part epoxy adhesive for field fabrication. Composition FP467C (7/00) Bondstrand® Product Data FIBERGLASS- COMPOSITEPIPEGROUP
RkJQdWJsaXNoZXIy NDE1MjE4