2- to 6-inch: 20-ft random lengths. 8- to 10-inch: 20-ft random lengths. Pipe lengths Fittings 70 °F 150°F 200°F 250°F Test Pipe Property1 Units 21°C 66°C 93°C 121°C Method Circumferential Tensile stress at weeping 103 psi 024.0 00- 00- 00- D1599 MPa 16500- 00- 00Tensile modulus 106 psi 003.65 03.44 03.20 02.98 GPa 025.2 23.7 22.1 20.5 Poisson’s ratio - 000.56 00.60 00.70 00.79 Ameron Longitudinal Tensile strength 103 psi 008.50 07.80 06.90 05.80 D2105 MPa 058.6 53.8 47.6 40.0 Tensile modulus 106 psi 001.60 01.35 01.24 01.10 D2105 GPa 011.0 09.3 08.5 07.6 Poisson’s ratio - 000.37 00.39 00.41 00.43 D2105 Beam apparent Elastic modulus 106 psi 001.70 01.30 01.00 - D2925 GPa 011.7 09.0 06.9 Hydrostatic design basis 103 psi 006.0 - - - D2992 MPa 041.4 -- - Mechanical properties1 Quick-Lock® straight/taper adhesive-bonded joint featuring integral pipe stop in bell for predictable, precise laying lengths. Flanges and flanged fittings. Joining systems Elbows Tees Flanges, blind flanges and reducing flanges Plugs and end-caps Nipples and couplings Tapered body reducers Tapered body reducers, tees and 90° and 45° elbows are available with any combination of Quick-Lock female and filament-wound flange ends. Laying lengths of filament-wound fittings with Quick-Lock ends match those of ANSI B16.9 steel buttwelding fittings. Flanged ends match ANSI B16.1 and B16.5 center-toface and face-to-face dimensions. 2
RkJQdWJsaXNoZXIy NDE1MjE4