Series 3000A Fiberglass Pipe and Fittings for general industrial service FP516B (10/97) Uses and applications Alcohol solutions Boiler feed water Bridge, roof and floor drains Brine and brackish water Chemical process piping Cooling water Demineralized water Electroplating Fuel oil piping General service piping Jet fuel piping Mild chemicals Municipal waste Potable water Power plant, steel mill and industrial plant piping Sewer lines and sewer force mains Source and recycle water Sump discharge Vent lines Water mains Water treatment Performance Working pressure to 450 psig depending on pipe size. No thrust blocks are required at rated system pressure for most buried piping configurations and most soil conditions. Thrust blocks may be required for 14 and 16- inch Bondstrand 3000A. For above-ground use, consult Ameron Fiberglass Pipe Division. Temperatures to 210°F (99°C) maximum. Full vacuum capabilities when buried and properly backfilled. For above-ground use, refer to collapse pressures listed below under pipe pressure performance. Recommended burial depth: 3 to 25 feet. Recommended for water, waste water (pH 1 to 12), moderately corrosive liquids and mild chemicals. Consult Ameron corrosion guide FP132 or Ameron Applications Engineering for recommendations for your particular application. Bondstrand Series 3000A is available with the patented Pronto-Lock® and Pronto-Lock II mechanical joining systems and may be used to temperatures as high as 210°F (99°C). Individual system components may not have the same ratings as the pipe. Refer to the detailed product information for the specific components to determine the pressure rating for the system as a whole. Listings MIL-P-29206A for jet fuels and petroleum liquids. Bondstrand® Product Data FIBERGLASSPIPEGROUP ISO-9001 CERTIFICATED FIRM
RkJQdWJsaXNoZXIy NDE1MjE4