EATONAerospace Group TF100-113C September 2013 3 Various options are available on the Model 64800 coupler. The part number system is described to the right. The complete part number is comprised of four parts, as explained in the tables below. 64800 Part 1 - Model number Part 2 —Option letter specifying features that may be added to the basic coupler Part 3 — Describes the various configurations of the male adapter on the outlet of the pressure control elbow Part 4 — Designates the outlet thread size & type Part 2 One or more of the options described at right may be added to the basic model number 64800 to obtain desired features. Option Letter Description Option Letter Description B Adds folding handle J Adds 3/8 inch hose barb fittings to both air and fuel sense ports C Adds product selection R Adds 90º elbow ¼ inch FNPT for air operated hydrant valve actuation D Adds lockwire to flange joint fasteners W Adds carriage assembly E Adds API style air/fuel QD X Adds safety clip to outlet disconnect (Option 2 only) F Adds hose barb fittings to air and fuel ports Y Adds handle assembly at outlet H Adds 3/8 inch FNPT fitting to both air and fuel sense ports Z Replaces standard transverse carrying handle at centerline of coupler with handle parallel to outlet (47214) Part 3 One of the options described at right must be added to determine the outlet male adapter configuration. Option Description Option Description 2 Adds 3 inch male adapter to mate standard thumb latched female QD. 4 Adds adapter to mate customer furnished Model 60600 (except option K) type QD 3 Adds 4 inch male adapter to mate 60700-1 style female QD Note: If Part 4 is left blank, no female QD will be shipped. This is a proper designation when it is desired to use a Model 64800 to replace a Model 60700-1, 60600 or 60600-1 coupler. In this case, Part 3 must correctly designate the proper male adapter fitting. Examples: 64800BFGX2H Coupler with folding handle, hose barbs in all air/fuel ports, collar stop assembly, safety ring on QD, standard thumb latch QD with 2½ inch NPT threads 64800G3 Coupler with collar stop and male adapter fitting to mate to 60700-1 (no female QD provided) Part 4 One of the options described at right must be added to specify the outlet thread size and type. Option Letter Description Option Letter Description H Adds 2½ inch NPT thread female QD. Can be used only with Option 2 from Part 3. N Adds 4 inch BSPP thread female QD K Adds 2½ inch BSPP thread female QD. Can be used only with Option 2 from Part 3. P Adds 4 inch NPT thread female QD L Adds 3 inch NPT thread female QD Q Adds 2 inch NPT thread female QD. Can be used only with Option 2 from Part 3. M Adds 3 inch BSPP thread female QD R Adds 4 inch -8 NPSC thread female QD. Can be used only with Option 3 from Part 3. S Adds 2 inch BSPP thread female QD. Can be used only with Option 2 from Part 3. Ordering Data
RkJQdWJsaXNoZXIy NDE1MjE4