FP215E (11/99) Series 4000 Fiberglass Pipe and Fittings for corrosive industrial service 2”-6” installs with no shaving required Uses and applications Acid drains Chemical process piping Corrosive slurries Food processing Geothermal Nonoxidizing chemicals and acids Listings Meets USFDA requirements for food processing piping under Federal Regulations 21 CFR175.105 and 21CFR177.2280 when bonded using Bondstrand RP6B adhesive. Performance Working pressure from 150 to 300 psig (1.0 to 2.0 MPa) depending on pipe size. Operating temperatures to 250°F (120°C), depending on fluid. Subzero temperatures will not adversely affect mechanical properties. Excellent corrosion resistance over a wide temperature range. See most recent release of Bondstrand Corrosion Guide (FP132) for specific applications. Does not require thrust blocks at ambient temperatures when properly installed in most soils. Smooth inner liner (Hazen-Williams C = 150) produces extremely low frictional loss for greater discharge and reduced pumping costs. Individual system components may not have the same ratings as the pipe. Refer to the detailed product information for the specific components to determine the pressure rating for the system as a whole. Joining systems Quick-Lock®straight/taper adhesive-bonded joint. 2” through 6” pipe outside diameter is within tolerance for reliable bonding without shaving. Integral pipe stop in socket featured for predictable, precise laying length. Flanges and flanged fittings. Bondstrand® Product Data FIBERGLASSPIPEGROUP with guide specification
RkJQdWJsaXNoZXIy NDE1MjE4