2 Composition Pipe Filament-wound fiberglass reinforced epoxy pipe with nominal 0.050-inch (1.3 mm) resin-rich reinforced liner. Nominal Pipe Size ASTM Designation ( in) ( mm) ( D2996) 2-3 50-75 RTRP 11FW-2221 4-6 100-150 RTRP 11FW-2222 8-16 200-400 RTRP 11FE-1113 Filament-wound fittings Furnished with reinforced liner using same materials as pipe. Tees 90 ° and 45° elbows Crosses Nipples and couplings 45 ° laterals Tapered body reducers Saddles (no liner) Threaded adapters (2 to 6 inch) Victaulic adapters (2 to 6 inch) Molded fittings (General Service only) Tees 90 ° and 45° elbows Reducing flanges Reducer bushings Endcaps Plugs Flanges 2 to 16-inch flanges match ANSI B16.5 bolt hole pattern for Cl 150 lb flanges. Other flange drilling patterns such as DIN, ISO, JIS, ANSI B16.5 Cl 300, etc. available on special request. Flanged fittings 2 to 12-inch filament-wound flanged fittings match ANSI B16.1 and ANSI B16.5 bolt hole pattern and laying length dimensions. ANSI 90° elbows must be specified as being either ‘long’ or ‘short’ when ordering. Thermosetting adhesives Bondstrand type PSX™•34 two-part epoxy adhesive for field fabrication. Nominal Random Pipe Size Length ( in) ( mm) ( ft) ( m) 2- 6 50-150 20 or 40 6 or 12 8 200 20 or 30 6 or 9 10-16 250-400 20 6 Pipe lengths Bondstrand Series 4000 filament-wound fittings, pipe and adhesive provide a continuous liner throughout the piping system.
RkJQdWJsaXNoZXIy NDE1MjE4