FP216F (9/97) Series 5000 Fiberglass Pipe and Fittings for severely corrosive industrial service Uses and applications Acid drains Bleach processing Chemical process piping Chlorinated water Chlorine Corrosive slurries Food processing plant Organic chemicals Oxidizing chemicals and acids Phosphoric acid General industrial service for severely corrosive liquids Listings Meets USFDA requirements for food processing piping under Federal Regulations 21 CFR175.105 and 21CFR177.2420 when assembled with RP-105B vinyl ester adhesive. Performance Working pressure from 150 to 450 psig (1 to 3.1 MPa) depending on pipe size. Operating temperatures to 200°F (93°C). Subzero temperatures will not adversely affect mechanical properties. Excellent corrosion resistance over a wide temperature range. See most recent release of Bondstrand Corrosion Guide (FP132) for specific applications. Does not require thrust blocks at ambient temperatures when properly installed in most soils. Smooth inner liner (Hazen-Williams C = 150) produces extremely low frictional loss for greater discharge and reduced pumping costs. Low thermal conductivity minimizes heat losses. Individual system components may not have the same ratings as the pipe. Refer to the detailed product information for the specific components to determine the pressure rating for the system as a whole. Bondstrand® Product Data FIBERGLASSPIPEGROUP ISO-9001 CERTIFICATED FIRM
RkJQdWJsaXNoZXIy NDE1MjE4