Quick-Lock straight/taper adhesive-bonded joint featuring integral pipe stop in bell for precise laying lengths. One-piece flanges in hubbed (standard) and hubless (heavy duty) configuration. All pipe is shipped ready for assembly with Quick-Lock bell x shaved spigot. Uses and Applications Above ground jet fuel lines Double-contained jet fuel lines General industrial service where static electrical charge build-up is possible or through hazardous areas (Class 1, Div. 1 and 2) Joining Systems Composition Pipe: Filament-wound fiberglass reinforced epoxy resin pipe with conductive filaments in the pipe wall. Fittings: Wide range of filament-wound epoxy resin fittings reinforced with fiberglass strands and conductive veils employing Quick-Lock®adhesive joint or flanged ends. Flanges: Filament-wound epoxy reinforced with fiberglass strands and conductive filaments. Blind flanges: Injection molded nonconductive epoxy in 2 through 12-inch (50 to 300 mm) sizes. Grounding saddles: Filament-wound fiberglass with stainless steel grounding cable. Adhesive: RP60B two-part thermosetting electrically conductive epoxy. Performance Bondstrand Series 7000 fiberglass pipe, fittings and flanges incorporate high-strength conductive filaments to prevent accumulation and discharge of potentially dangerous levels of static electrical charges. Series 7000 piping systems are made electrically continuous by using a conductive adhesive in the adhesive-bonded joint and for mounting flanges. Accumulated charges are dissipated from the fiberglass pipe system by stainless steel cables embedded in fiberglass grounding saddles. The grounding saddles are adhesive bonded to the pipe at appropriate locations to assure resistance to ground is less than one MEGOHM. System rating of 150 psig at 210°F (10 bar at 99°C). Individual system components may not have the same ratings as the pipe. Refer to the detailed product information for the specific components to determine the pressure rating for the system as a whole. Listings and Approvals MIL-P-29206A for jet fuels and petroleum liquids Bondstrand Series 7000 Antistatic Fiberglass Pipe and Fittings for industrial service Bondstrand® Product Data ISO-9001 CERTIFICATED FIRM FP305D (8/00) FIBERGLASS- COMPOSITEPIPEGROUP
RkJQdWJsaXNoZXIy NDE1MjE4